Model: PCIPFM_025_2_1_DE
Hãng: Procom
ĐẶC ĐIỂM KỸ THUẬT:
SS 316L BODY – TECHNOPOLYMER ACTUATOR PCIPFM
The pneumatically operated shut-off valve of the PCIPFM series consists of a free flow valve body, an intermediate and a pneumatic actuator. The Y-shape of the valve body grants higher values of the flow coefficient Kv than the similar DN conveyed flow bodies.
The strong and robust actuator (Command Head) is made of Nylon reinforced with 30% fiberglass (Technopolymer). The drive spring inside is pre-compressed; this makes the servo removable and inspectable in total safety. The intermediate packing gland is made of Carbographite loaded PTFE V-rings and Viton, for optimal sealing both at high and low temperatures
Please compare the products using the table below to find the product that best suits your requirements and for more details remember to download the product sheet, where you can find all the specifications of the different couplings
MAXIMUM PERMISSIBLE ΔP [BAR] AND FLOW COEFFICIENT VALUES[M³/H]
| DN \ Actuator [mm] | Actuator 36 | Actuator 50 | Actuator 70 | Actuator 100 |
|---|---|---|---|---|
| DN 10 | 16 bar | - | - | - |
| DN 15 | 14 bar | 18 bar | 35 bar | - |
| DN 20 | 7 bar | 14 bar | 25 bar | - |
| DN 25 | - | 9 bar | 20 bar | - |
| DN 32 | - | 5.5 bar | 13 bar | 24 bar |
| DN 40 | - | - | 8 bar | 18 bar |
| DN 50 | - | - | 5 bar | 12 bar |
| DN 65 | - | - | - | 6.5 bar |
| Kv [m³/h] |
|---|
| 3 |
| 3.9 |
| 9.3 |
| 13.8 |
| 22 |
| 31.5 |
| 39 |
| 46.7 |
Bình luận