Tecsis - Magtec Electronic Pressure Switch & Pressure Transducer Model 3301, S1200

Công ty PITESCO chuyên phân phối các thiết bị công nghiệp tự động hóa như điện công nghiệp, cảm biến, biến tần; PLC,...của các hãng Đức, Ý, Nhật,... 
Xin vui lòng liên hệ với chúng tôi để được tư vấn kỹ thuật và hỗ trợ giá tốt.
Mr Dương
Senior Sales Eng
Cellphone: 0986.37.47.86 - 0914.643.179
Email: duong.pitesco@gmail.com
Website: http://www.tecsis-vietnam.com/

• Accuracy 1.0%
• Volt -output signal or 2x PNP-output signal
• Pressure range from 0…0.1 to 0…25 bar, also vacuum
• Up to 600 bar pressure monitor version
• 
  
  

  Measuring principle	Hall effect sensor
  Accuracy	<1.0 % type
  Hysteresis	P3301: <0.4 % type S1100: ≤5 % of working range
  Repeatability	P3301: 0.06 % S1100: 1 % of full scale value
  Long term stability	<0.4 % of end value per year
  Overpressure protection	<0.6 bar 6x; ≤6 bar 2.5x;  10 bar 2x ≤25 bar 1.5x. Same value applies for underpressure, however max. -1 bar.
  Response time	≤10 ms for 10-90% of the range
  Pressure connection	G1/4"
  Sensor body	Brass
  Connector piece	Plastic
  Wetted parts	Nickel-copper alloy
  Media temperature	-20 °C to +80 °C
  Ambient temperature	-20 °C to +80 °C
  Temperature deviation	≤0.4 %/10K type for zero point and measuring span
  Temp. compensation range	0 °C to +80 °C
  Signal options	P3301: 0-10 V S1100: 1 pc. NO, NC, PNP output signal
  Supply voltage	0-10 V output signal: 12-30 V DC PNP output signal: 10-30 V DC
  Power consumption	P3301: 9 mA, S1100: ≤25 mA (excl. load) S1100: 0.1 A
  Electrical connection	4 pole M12 connector Polarity reversal proof and overvoltage protection
  Adjustability	P3301: Not adjustable S1100: 5-95 % of measuring span
  IP-class	IP65 according to EN60529
  EMC data	Emission EN61326, Interference EN61326
  Shock	350 g according to IEC770
  Vibration	10 g according to IEC770
  Weight	0.09 kg

3-wire 0-10V	2 x PNP switch output