Appearance | AX4 | AX3 | AX7 | AX2 | AX9 |
|
|
|
|
|
W X H X D (mm) | 48 X 48 X 63 | 96 X 48 X 63 | 72 X 72 X 63 | 48 X 96 X 63 | 96 X 96 X 63 |
Input selection | Multi input - Thermocouple : K, J, R, T (IEC) - RTD : Pt 100 Ω (IEC) |
Input Sampling time | 0.1 s |
Input impedance | 1 ㏁ max |
Allowable wiring resistance | 10 Ω / 1wire max(RTD). but resistances among 3 wires should be same. |
Allowable input voltage | 10 V d.c max |
Display accuacy | ± 0.3 % of F.S |
Display type | 7 Segment LED (PV : red, SV : green) |
Font Size | PV | 13.0 X 6.5 | 15.9 X 7.6 | 14.5 X 7.0 | 14.5 X 7.0 | 22.5 X 11.2 |
SV | 9.2 X 5.2 | 12.0 X 6.0 | 9.4 X 4.7 | 10.8 X 5.2 | 18.7 X 9.3 |
Input resolving power |
-Thermocouple : 0.1 ℃ (TC-K2, TC-J), 0.5 ℃ (TC-K1) | -RTD : 0.03℃, (0.1 ℉) |
|
Insulation resistance | min 20 ㏁,, 500 V d.c for 1 minute (primary terminal-secondary terminal) |
Dielectric strength | 2300 V a.c 50/60 Hz, for 1 min (primary terminal-secondary terminal) |
Control method | PID control by Auto - Tuning, ON / OFF control. |
Manual reset | Users set within the range 0.0 % ~ 100.0 % |
Control output operation | Reverse operation / Direct operation selectable by the parameter setting |
Control output |
-Reverse operation /Direct operation Selectable by the parameter setting 1a contact, 3A 240 V a.c, 3 A 30 V d.c (resistive load) | -Voltage pulse output for running SSR [time sharing proportional control (CYC)] -Voltage pulse output for running SSR [phase control (PHR)] 0/12 V d.c, pulse voltage (resistive load minimum 600 Ω) |
|
Power supply voltage | 100 - 240 V a.c 50/60 Hz |
Voltage fluctuation | ± 10 % of the power supply voltage |
Power consumption | 5.5 VA max |
Ambient temperature | -5 ~ 50 ℃ |
Ambient humidity | 35 ~ 85 % R.H(but without dew condensation) |
Vibration resistance | 10 - 550 Hz, 0.75 mm, each to direction X, Y and Z for 2 hours |
Shock resistance | 300 ㎨ to direction 6 each 3 times |
Bình luận