Thiết Bị Chống Sét - Ttc-6P-1X2-F-M-24Dc-Ut-I - 2906781 (Phoenix Contact)

Liên hệ

30/7, Vp14, Thuận An, Bình Dương

TTC-6P-1X2-F-M-24DC-UT-I Surge protection device

2906781

Surge protection, consisting of protective plug and base element, with integrated status indicator and disconnect knife for a 2-wire floating signal circuit, e.g., 0(4) ... 20 mA current loop. Indirect grounding via gas discharge tube, HART-compatible.

 




IEC test classificationC1
C2
C3
D1
TypeDIN rail module, two-section, divisible
Product typeSurge protection for MCR technology
Product familyTERMITRAB complete
Wire pairs per module1
Insulation characteristics
Overvoltage categoryIII
Pollution degree2




Electrical properties



Nominal voltage UN24 V DC




Connection data



Connection methodScrew connection
Screw threadM3
Tightening torque0.5 Nm ... 0.6 Nm
Conductor cross section flexible0.2 mm² ... 2.5 mm²
Conductor cross section rigid0.2 mm² ... 4 mm²
Conductor cross section AWG24 ... 12




Dimensions



Dimensional drawing
Width6.2 mm +0.1 mm
Height105.8 mm
Depth100 mm (incl. DIN rail 7.5 mm)




Material specifications



Flammability rating according to UL 94V-0
Insulating materialPBT
Housing materialPBT




Mechanical properties



Mechanical data
Open side panelNo




Protective circuit



Direction of actionLine-Line & Line-Signal Ground/Shield & optional Signal Ground/Shield-Earth Ground
Maximum continuous voltage UC30 V DC
21 V AC
Rated current600 mA (56 °C)
Operating effective current IC at UC≤ 5 µA
Residual current IPE≤ 1 µA
Nominal discharge current In (8/20) µs (line-line)5 kA
Nominal discharge current In (8/20) µs (line-ground)5 kA
Nominal discharge current In (8/20) µs (line-signal ground)5 kA
Pulse discharge current Iimp (10/350) µs (line-line)0.5 kA
Pulse discharge current Iimp (10/350) µs (line-earth)0.5 kA
Pulse discharge current Iimp (10/350) µs (line-signalground)0.5 kA
Total discharge current Itotal (8/20) µs10 kA
Voltage protection level Up (line-line)≤ 200 V (C1 - 1 kV / 500 A)
≤ 320 V (C2 - 10 kV / 5 kA)
≤ 50 V (C3 - 25 A)
≤ 55 V (C3 - 100 A)
Voltage protection level Up (line-earth)≤ 900 V (C1 - 1 kV / 500 A)
≤ 1.05 kV (C2 - 10 kV / 5 kA)
≤ 1.3 kV (C3 - 25 A)
≤ 1.4 kV (C3 - 100 A)
Voltage protection level Up (line-signalground)≤ 750 V (C1 - 1 kV / 500 A)
≤ 750 V (C2 - 10 kV / 5 kA)
≤ 700 V (C3 - 25 A)
≤ 750 V (C3 - 100 A)
Voltage protection level Up static (line-line)≤ 50 V (C1 - 1 kV / 500 A)
≤ 120 V (C2 - 10 kV / 5 kA)
Voltage protection level Up static (line-earth)≤ 900 V (C1 - 1 kV / 500 A)
≤ 1.05 kV (C2 - 10 kV / 5 kA)
Voltage protection level Up static (line-signalground)≤ 750 V (C1 - 1 kV / 500 A)
≤ 750 V (C2 - 10 kV / 5 kA)
Response time tA (line-line)≤ 1 ns
Response time tA (line-earth)≤ 100 ns
Response time tA (line-signalground)≤ 100 ns
Input attenuation aE, sym.typ. 0.3 dB (≤ 250 kHz / 150 Ω)
Cut-off frequency fg (3 dB), sym. in 150 Ω systemtyp. 940 kHz
Capacity (Core-Core)typ. 2.2 nF
Resistance per path1.65 Ω ±20 %
Surge protection fault messageoptical
Max. required back-up fuse630 mA (FF)
Impulse durability (line-line)C1 - 1 kV / 500 A
C2 - 10 kV / 5 kA
C3 - 100 A
Impulse durability (line-earth)C1 - 1 kV / 500 A
C2 - 10 kV / 5 kA
C3 - 100 A
D1 - 500 A
Impulse durability (line-signalground)C1 - 1 kV / 500 A
C2 - 10 kV / 5 kA
C3 - 100 A
D1 - 500 A
Pulse reset time (line-line)≤ 700 ms
Pulse reset time (line-earth)≤ 30 ms
Pulse reset time (line-signalground)≤ 1500 ms
Additional technical data
Max. total discharge current I total max (8/20) µs20 kA (1x)


Bình luận

HẾT HẠN

0326 323 322
Mã số : 17377574
Địa điểm : Bình Dương
Hình thức : Cần bán
Tình trạng : Hàng mới
Hết hạn : 14/01/2024
Loại tin :

Thường

Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!

Gợi ý cho bạn