Cung Cấp Bộ Nguồn Quint Phoenix Model : Ps-100-240Ac/24Dc/2,5A

Technical Data
Product
Description Type Order No. Pcs./Pkt.
Single-phase primary-switched power supply unit QUINT-PS-100-240AC/24DC/2.5 29 38 57 8 1
Accessories
Description Type Order No. Pcs./Pkt.
Assembly adapter for QUINT POWER 2.5 A and 5 A on S7 300 rails QUINT-PS-ADAPTERS7/1 29 38 19 6 1
Input Data
Nominal input voltage range 100...240 V AC
Input voltage range 85...264 V AC, 90...350 V DC
Frequency range 45...65 Hz (0 Hz at DC input)
Current consumption 0.86 A (at 120 V AC (nominal load)), approximately
0.47 A (at 230 V AC (nominal load)), approximately
Inrush current surge < 20 A (typical), inrush current limiting/Ι
2
t (25°C): < 2.2 A²s
Mains buffering (for nominal load) > 20 ms (at 120 V AC), > 100 ms (at 230 V AC)
Typical switch-on time < 1 s
Protective circuit Transient surge protection varistor
Input fuse 5 A (slow-blow, internal)
Recommended backup fuse Circuit breaker 6 A, 10 A or 16 A, Characteristic B
Discharge current to PE < 3.5 mA
Connection method COMBICON screw/plug-in connection
Stripping length 7 mm
Output Data
Nominal output voltage 24 V DC ±1%
Setting range for the output voltage 22.5...28.5 V DC
Output current 2.5 A (-25...+60°C)
3.75 A (with POWER BOOST, -25...+40°C)
Derating Above +60°C: 2.5% per Kelvin
Current limit IBOOST= 3.75 A (for short circuit), approximately
Maximum capacitive load Unlimited
System deviation < 1% (static load change 10...90%)
< 2% (dynamic load change 10...90%)
< 0.1% (input voltage change ±10%)
Power dissipation
Maximum nominal load
Maximum no load
10 W
2 W
Efficiency > 86% for 230 V AC and nominal values
Rise time < 2 ms (UOUT(10...90%))
Residual ripple/switching peaks (20 MHz) < 100 mVpp
(for nominal values)
Parallel connection Yes, to create redundant systems and increase efficiency
Internal surge protection Yes, limited to 35 V DC, approximately
Resistance to return supply 35 V DC
Connection method COMBICON screw/plug-in connection
Stripping length 7 mm
DC OK Signal Output, Active
Type of output Transistor output, Uout> 0.9 x UN: High signal
Continuous current 40 mA, maximum
Output voltage +24 V DC (signal)