Gasmet Vietnam, Gasmet Cems, Gasmet Cmm Máy Giám Sát Chất Lượng Khí, Theo Dõi Và Giám Sát Thủy Ngân Trong Khí Thải

Công ty TNHH TM DV Anh Nghi Sơn

(ANS Vietnam) xin gửi đến quý khách hàng lời chúc sức khỏe và lời chào trân trọng, sự hưng thịnh và ngày càng phát đạt.

Chúng tôi là một trong những Công ty hàng đầu chuyên cung cấp máy móc, thiết bị cho ngành công nghiệp, điện công nghiệp và điều khiển tự động của các hãng nổi tiếng ..balluff Vietnam,Baumer Vietnam,Bei Encoder Vietnam ,Crouzet Vietnam, Kuebler Vietnam , Koganei Vietnam,Celduc Vietnam,Epulse Vietnam,Crydom Vietnam, Raytek Vietnam,Ircon Vietnam ,MTS Vietnam, Kimo Vietnam, Pilz Vietnam, Status Vietnam, newall vietnam, sterilair vietnam, Univer Vietnam,Masibus Vietnam, Elap Vietnam, Setra Vietnam, Suntronix Vietnam, WiseVietnam, TMTeck Vietnam, dakotainstruments Vietnam, FIC Vietnam, elap encoder vietnam, Flowmeters Vietnam, Conch Vietnam, unipulse vietnam, Tival sensors Vietnam, Divus Vietnam, RKC Instrument Vietnam, Conch Vietnam, Automation, Novotechnik Vietnam, Vaisala Vietnam, Ametek Vietnam Jenco Vietnam, Microdetector Vietnam, MTS Sensor, Balluff sensor, Gems sensor Vietnam, Lion Precision Vietnam, Arkon Vietnam, Microsonic Vietnam,Osukl Vietnam,Proxitron Vietnam,JJ Automation Vietnam,Offshore vietnam Brooks Instrument Vietnam,Sensormation Vietnam, Fraba Vietnam, Posital Vietnam,Bernstein Vietnam, Dwyer Instruments, Dwyer Instruments,univer cylinder vietnam, Banico Controls Vietnam, Hopeway Vietnam, IMR Vietnam, Reloca Comat Vietnam, Metalwork Vietnam,Posital Vietnam, Micro Process Controls, Jelsystem Vietnam, wise vietnam......

Xin gửi đến quý khách thông tin của sản phẩm sau:

Gasmet™ CEMS is used for continuous emissions monitoring in waste incinerators and cement plants. In addition, various process monitoring applications are also possible. Typically, concentrations of H2O, CO2, CO, SO2, NO, NO2, N2O, HCl, HF, NH3, O2 and TOC (Total Organic Carbon) are continuously measured with the Gasmet™ CEMS. The Gasmet™ CEMS has been also certified by TÜV (17th BlmSchV) and MCERTS. It also fulfills the requirements of QAL 1 according to EN 14181 and EN ISO 14956.

Overview

Gasmet™ CEMS is a modular construction that typically comprises of Gasmet™ CX4000 FTIR gas analyzer, heated sampling unit, industrial PC and a ZrO2 – oxygen analyzer which are installed in an air-conditioned cabin. All modules are 19’’ rack mounted in pull-out shelves for easy accessibility & service.  Gasmet™ CX4000 FTIR gas analyzer can also be equipped with a TDL (Tunable Diode Laser) O2 - measurement module.

Gasmet™ CX4000 FTIR gas analyzer allows the simultaneous measurement of up to 50 gas compounds. CX4000 FTIR has a multipass sample cell which is heated to 180 C and features rhodium-gold plated mirrors.

The hot-extractive sampling system consists of a heated sample gas probe, heated sample lines and heated sample pump unit.  Two-stage particle filtration is used in order to remove particles from the sample gas. The sample pump unit includes gas connections for the CX4000 FTIR gas analyzer, optional O2 & FID analyzers and span & zero gas.     

The industrial PC is used processing & storing the sample spectra with Calcmet™ - software. The Calcmet™ software analyzes the sample spectrum using sophisticated analysis algorithms. Cross-interference from other gases is automatically taken into account in the analysis settings of each compound. Since water content of the sample gas is measured, the results can be reported on either “wet” or “dry” basis. With Gasmet™ CEMS, TOC can be measured without an additional FID – analyzer (as a sum of individual hydrocarbons).  

From the industrial computer, the analysis results can be transferred with analog 4 – 20 mA outputs and various digital protocols (e.g. MODBUS, PROFIBUS). Alarms can be transferred with relay contacts. The Gasmet™ CEMS also provides different alarm functions. If any of the critical alarms is activated, instrument air starts to flow automatically into the system to prevent condensation.

With FTIR measurement technology there is no need to do any span or re-calibrations, only zero calibration with nitrogen every 24 hours. Automated span checks are also supported as standard.  

Key Advantages

• Low need for maintenance
• No span calibrations required (automated span checks possible)
• Hot-extractive-sampling; no sample loss or change of composition
• Capability to water soluble compounds like HCl, HF, NH3, etc.
• TOC (Total Organic Carbon) measured with FTIR – no need for a separated FID
• Fully automated measurement system with comprehensive safety functions
• Ready for future requirements - new compounds can be added without any hardware changes
• Fully modular system built to customer specification

Proven Quality

• TÜV (17th BlmSchV) and MCERTS certfied
• Fully compliant with U.S. EPA 40 CFR Part 60 Appendix b Performance Specification 15 (Extractive FTIR Continuous Emissions Monitoring Systems in Stationary Sources)

Gasmet CMM

Gasmet™ CMM (Continuous Mercury Monitor) is designed for continuous & unattended monitoring of total mercury (Hg) in flue gas.

Overview

The Gasmet™ CMM utilizes Cold Vapor Atomic Fluorescence (CVAF) measurement technology which is specific to mercury. Hence there is virtually no interference from SO2 or HCl.  The sampling unit is also state-of-the-art with an integrated high temperature converter to effectively transform different mercury compounds to atomic mercury, with minimal risk for recombination. There´s also a  calibration unit for automatic calibrations both with atomic mercury and mercury chloride, and a sample probe designed especially for mercury sampling.

Functional Description

Gasmet™ CMM (Continuous Mercury Monitor) has three main components, all in-house delveloped:

1. Gasmet™ CVAF (Cold Vapor Atomic Fluorescence) mercury analyzer, which has an integrated high temperature dry thermal converter for converting all mercury compounds to atomic mercury. This analyzer has a detection limit less than one ng/Nm³. 
2. Gasmet™ Mercury Calibrator generates calibration gas for automatic zero – and span calibrations, with wide ranger for mercury concentration and gas delivery rate and for atomic mercury Hg⁰ or mercury chloride HgCl₂.
3. Gasmet™ Gasmet Mercury Sampling System includes heated sample gas lines and Gasmet sample dilution probe, heated probe tube and effective blowback system for the filter.

Key Advantages

• Very low detection limit with CVAF technique
• No need for separate chemicals, gold amalgamation concentrators, acid scrubbers, or additional gases
• Virtually no interference from other gases such as SO₂, HCl
• Direct sampling with sample dilution and effective filter blowback system – simple probe design
• Simple and reliable system with low need for maintenance

Hãy liên hệ trực tiếp với chúng tôi để nhận được sự hỗ trợ tốt nhất.

Hãy cung cấp thông tin về bất cứ sản phẩm bạn đang cần, chúng tôi bảo đảm về chất lượng, dịch vụ và giá cả tổt nhất.

Chúng tôi rất vui và mong muốn được hợp tác với Quý khách !

Kindest Regards,

Vo Hong Canh

I Sales  Eng I
====================
I cellphone I  +84 938 214 498

                           +84 986 025 980
I email I           canh.ans@ansvietnam.com 

Online contact===================================
 YH :canh_ans    SKYPE :  canh_ans