Động Cơ Servo| Mr-Mq100 Servo/Motion Mitsubishi| Mr-Mq100 Servo/Motion Mitsubishi|

Liên hệ

D5 Miếu Nổi, Đinh Tiên Hoàng, P.3, Q.bình Thạnh



PITESCO Việt Nam - Công ty XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp. Chúng tôi đáp ứng xu hướng công nghiệp hóa, hiện đại hóa

Liên hệ cho chúng tôi theo số 0972.636.889/ 0914.432.418 để  thông tin mà Quý khách CẦN.       

Email  thanh.pitesco@gmail.com

PHÂN PHỐI HÀNG TRÊN TOÀN QUỐC

Servo/Motion - MR-MQ100

Leading while following

For most applications, a complete control platform of a PLC and motion controller will do the job. However, for smaller systems, this may not address competitive cost pressures. The MR-MQ100 allows a single axis to be completely controlled and synchronised to a separate encoder or virtual axis with no additional controller hardware. Hence applications such as rotary cutters, flying saws and labelling can be economically accomplished without exceeding a tight control budget.

Limit cost, not options

While the MR-MQ100 is an economical solution, this doesn’t mean lacking in features. A complete range of essential functions are available, including encoder and virtual axis synchronization, registration, point to point positioning and user defined cam profiles. In addition, the hardware complements these powerful software features with built-in I/O and SSCNET III motion networking capability as well as an Ethernet port.

Reduced wiring

The MR-MQ100 also helps keep system costs down with its use of SSCNET III, Mitsubishi''''s simple but rugged optical fiber motion network. A single fiber connection is all that''''s needed to provide full communication and control over all functions of the MR-J3B servo amplifier regardless of capacity.

Fast, easy system set-up

High performance is less valuable if it''''s hard to use. The MR-MQ100 avoids this with the intuitive MT Developer 2 software that replaces abstract programming with graphical models of the actual mechanical system. It''''s easy to create virtual clutches, gears and cam profiles by simple drag and drop selection.

Complete motion systems

The MR-J3-B ranges from 50 W to 55 kW and offers patented technology to improve system performance such as real time vibration suppression and auto tuning. Further design flexibility is offered by the option of rotary or linear motors.


  • Run any single axis application from a standalone, compact unit
  • Graphic based programming mimics actual mechanical system
  • Motor options from 50 W to 55 kW
  • High performance, noise free optical fibre amplifier connection

Product range
























Items Specifications
Power supply24 V DC ±10 % (required current capacity: 400 mA)
Digital inputs (mark sensors)4 inputs (24 V DC)
Digital outputs2 outputs (24 V DC)
Synchronous encoder Signal typeA/B phase pulse train input
Voltage input/open-collector
type (5 V DC)
Up to 800 kpps (after magnification by 4), up to 10 m
Differential input typeUp to 4 Mpps (after magnification by 4), up to 30 m
Peripheral interface100 Mbps/10 Mbps Ethernet (for programming and additional options)
Number of contral axis1 axis
Operation cycle0.44 ms
Servo amplifierMR-J3B servo amplifier (over SSCNETIII)
Programming languageMotion SFC, dedicated instruction, mechanical support language (SV22)
Memory back up (included)Q6BAT
Cam function Number of camsUp to 256 cam profiles may be stored internally.
Resolution per cycle256, 512, 1024, 2048
Stroke resolution32767
Control modeTwo-way cam, feed cam
Weight [kg]0.7
Dimensions (W x H x D) [mm]30 x 178 x 135



HẾT HẠN

0914 432 418
Mã số : 6918477
Địa điểm : Hồ Chí Minh
Hình thức : Cần bán
Tình trạng : Hàng mới
Hết hạn : 18/02/2020
Loại tin :

Thường

Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!

Gợi ý cho bạn