Liên hệ
D5 Miếu Nổi, Đinh Tiên Hoàng, P.3, Q.bình Thạnh
PITESCO Việt Nam - Công ty XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp. Chúng tôi đáp ứng xu hướng công nghiệp hóa, hiện đại hóa
Liên hệ cho chúng tôi theo số 0972.636.889/ 0914.432.418 để CÓ thông tin mà Quý khách CẦN.
Email : thanh.pitesco@gmail.com
PHÂN PHỐI HÀNG TRÊN TOÀN QUỐC
Model parameter | CD620-AA-000 | |||
Power | Main supply voltage | Single-phase or 3-phase AC220V±20% 47~63Hz | ||
Control circuit voltage | DC24V 1A | |||
Current | Rated current(RMS) | 7A | ||
Peak current(PEAK) | 25A | |||
Feedback signal | 2500PPR (incremental encoder with 5V ) | |||
Brake chopper | Use an external braking resistor if necessary | |||
Brake chopper threshold | DC680V±5V | |||
Over-voltage alarming threshold | DC700V±5V | |||
Under-voltage alarming threshold | DC400V±5V | |||
Cooling method | Fan | |||
Weight | 2.4kg | |||
Position Mode | Max. frequency of input pulse | Differential signal: 500KPPS, Open-collector signal: 200KPPS | ||
Pulse command mode | Pulse+direction, CCW+CW, (higher voltages than 5V need external current limiting resistors)(do not support A+B phase) | |||
Command smoothing | Low-pass filtering(Adjustable by internal parameters) | |||
Feedforward gain | Adjustable by internal parameters | |||
Electronic gear ratio | Setting range, Gear factor: -32768~32767, Gear divider: 1~32767, 1/50≤|Gear factor/Gear divider|≤50 | |||
Position loop sampling frequency | 1KHz | |||
Speed Mode | Analog input voltage range | 0 ~±10V(Resolution 12bit) | ||
Input impedance | 200K | |||
Analog input sampling frequency | 4KHz | |||
Command source | External analog command/iAdjustable by internal parameters | |||
Command smoothing | Low-pass filtering(Adjustable by internal parameters) | |||
Input voltage dead-zone setting | Adjustable by internal parameters | |||
Input voltage offset settiong | Adjustable by internal parameters | |||
Speed limit | Adjustable by internal parameters | |||
Torque limit | Adjustable by internal parameters / External analog command control | |||
Speed loop sampling frequency | 4KHz | |||
Torque Mode | Analog voltage input range | 0 ~±10V (Resolution 12bit) | ||
Input impedance | 200K | |||
Input sampling frequency | 4KHz | |||
Command source | External analog command/internal command | |||
Command smoothing | Low-pass filtering(Adjustable by internal parameters) | |||
Speed limit | Adjustable by internal parameters/External analog command control | |||
Input voltage dead-zone setting | Adjustable by internal parameters | |||
Input voltage offset setting | Adjustable by internal parameters | |||
Current sampling frequency | 16KHz | |||
Digital Input | Input specification | 7 digital inputs, with COM1 terminal for PNP or NPN connection. | ||
Input function | Define freely according to requirement, supporting following functions: Driver enable,driver fault reset,driver mode control,Proportional control, forward inhibit limit, reverse inhibit limit, negative limit position,home signal, speed command reverse, internal speed or position select | |||
Digital Onput | Output specification | 5 digital outputs,OUT1~OUT4 current is 100mA,OUT5 current is 800mA | ||
Output function | Define freely according to requirement, supporting following functions: Driver ready, driver fault, position reached, motor at zero speed, motor brake, motor speed reached, N signal | |||
Protection functions | Over-voltage protection,under-voltage protection,motor over-heat protection(I²T),short-circuit protection,drive over-heat protection,etc. | |||
Communication interface | RS232 | |||
Operation Environment | Operating temperature | 0~40℃ | ||
Storage temperature | -10℃~70℃ | |||
Humidity(non-condensing) | 5~95% | |||
Protection class | IP20 | |||
Installation environment | Installed in a dust-free,dry and lockable environment(such as in a electrical cabinet) | |||
Installation mode | Vertical installation | |||
Altitude | Below 1000m | |||
Atmospheric pressure | 86kpa~106kpa |
HẾT HẠN
Mã số : | 6454497 |
Địa điểm : | Hồ Chí Minh |
Hình thức : | Cần bán |
Tình trạng : | Hàng mới |
Hết hạn : | 19/12/2020 |
Loại tin : | Thường |
Gợi ý cho bạn
Bình luận