Cổng kiểm soát cho người đi bộ - Tripod Turnstile RNCF838

Descriptions: the turnstile provides a basic tripod to control access smoothly and effectively by basic operation, and also prevent illegal in and out. The machine is well in design, rustproof, durable and can resist external destroy.

According to different machine centers, intelligent tripod turnstile can be divided into fully automatic tripod turnstile(RNCF858) and semi-automatic tripod turnstile(RNCF838).

Their differences are fully automatic product can finish any work by power. The arm will automatically drop when it is powered off. And the arm will automatically go up when power is turned on again. To Semi-automatic product, the arm can drop automatically when it is powered off. But when the power is turned on, the arm will be raised by hand.

◇Technology speciation:Framework: 304 Grade Stainless Steel

Specification: 1200*280*980mm

Weight: 75kg

Arms length: 510mm

Machine center: imported Germanic technological motor 

Logic voltage: 24v

◇Function:

1.Single/double walkway---controlled in one direction or both

2.A valid lock action can allow one passage at one time
Normally open---the machine will unlock when a valid signal is received

3.It will lock automatically if passage through turnstile is not completed within pre-set time, the set time can be adjusted via parameter change

◇Emergency configuration:
The tripod will drop automatically by power off or by hand to provide a clear walkway for escape in the event of an emergency 

◇Interface: one standard port-rs485

◇Control panel with count and LED digital function

◇Traffic-light: A Red Cross symbol will illuminate to indicate the unit is not available for pass, and a green arrow indicate the direction of allowable passing 

◇Transit speed :20——30 persons per minute

◇Work environment:Indoor/outdoor

Temperature: 10 below degree to 50 degree

Mechanical tripod turnstile:

The turnstile provides a way to pass the gate orderly. It applies chiefly in some situations where need single-direction control such as market club film theatre gymnasium subway airport customs and etc. it can be divided into Vertical (RNCF838J).

1.Specific system of positioning and resetting: the unit can make any arm in the horizontal level.

2.Unit is pure mechanical product without electric control system, and is also simply in configuration and high in reliability.

3.Unit allows free movement in one direction-- reversed direction locked.

4.It provides a smooth and effective way for single walkway limited.

◇Applications: 
Station/exhibition/airport/subway/government/market and so on