Chống dính khuôn nhiệt độ cao Nabakem BN Spray

- Dùng chống dính bôi trơn khuôn ở nhiệt độ cao.
- Ứng dụng trong thủy tinh hoặc kim loại
- Bôi trơn bánh răng, xích, băng tải, hộp số...
- Đóng gói: Bình xịt 420ml
- Xuất xứ: Nabakem Hàn Quốc

• Forming antiabrasive dry film with excellent cohesiveness • Excellent antiabrasiveness • White lubricant and release agent with excellent heat resistance(1200℃) • Easy-to-use spray type • Quick drying product improving workability and cost-effectiveness

• Mold relase agent in molding diamond tool • Lubricant and release agent for molding alumium chassis • Lubricant for chain, conveyer, open gear and high temperature furnace used in ironmill and glass factory requiring hight temperature • Release agent for product molten at high temperature: release agent for molding of molten metal, molten glass and high-temperature molten product • Mold release agent for rubber molding • Mold release agent for plastic molding

• Clean oil, dust and carbon off applied surface before using it. (Use NABAKEM PMC-3 or DC-5000 to degrease mold and metal) • Shake the can well. • Spray it evenly in the distance of 30cm. • When 1∼2 passes after spraying, it does not adhere to your hands. • It is cured completely. • Five minutes at 70℃ will do to make it cured. • Then, its cohesiveness is improved.

• Provided good ventilation. • Do not keep it near fire. • Avoid direct sunlight. • Keep it in the well-ventilated cool place 40℃.