| Tốc độ truyền dữ liệu | 10/100/1000Mbps |
| Hãng sản xuất | ONV |
| Số cổng kết nối | 8 x RJ45 |
| MAC Address Table | Đang chờ cập nhật |
| Số cổng kết nối (2) | Đang chờ cập nhật |
|
Product |
9-PORT 10/100 SWITCH WITH 4-PORT POE+ |
|
Type |
POE31804P-at |
|
Network Ports |
9 10/100Mbps RJ45 PortsAUTO Negotiation/AUTO MDI/MDIX |
|
Power Pin Assignment |
Data provided over pairs over 1/2and 3/6 ,Power over |
|
PoE Distance |
100m |
|
Transmission Method |
Store-And-Forward |
|
Network Media |
10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) |
|
100BASE-TX: UTP category 5, 5e cable (maximum 100m) |
|
|
Performance Specifications |
Bandwidth:1.6 Gbps |
|
Network latency:Less than 20 μs for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission |
|
|
Buffer memory:96 KB embedded memory per unit |
|
|
Address database size:1,000 media access control (MAC) addresses per system |
|
|
Addressing:48-bit MAC address |
|
|
Mean Time Between Failure (MTBF):190,000 hours (~ 21 years) |
|
|
Acoustic Noise: 0 dB |
|
|
Network Protocol and Standards |
IEEE 802.3i 10BASET |
|
IEEE 802.3u 100BASETX |
|
|
IEEE 802.3x Flow Control |
|
|
IEEE 802.1at DTE Power via MDI |
|
|
IEEE 802.3at |
|
|
Status LEDs |
System: Power, PoE Maximum Power |
|
Per Port: Link, Activity, Speed, PoE Active, PoE Fault |
|
|
Power Supply |
Total Power Consumption: 120 W maximum |
|
PoE Watt budget: 110W |
|
|
IEEE802.3at Power Consumption: 110 W maximum (Ports 1 – 4) |
|
|
48VDC,2.5A power output; plug is localized to country of sale |
|
|
Physical Specifications |
Dimensions (H x W x D):28 x 108 x 189mm |
|
Weight:0.65kg |
|
|
Environmental Specifications |
Operating temperature: 0 to 55°C |
|
Storage temperature: -20 to 75°C |
|
|
Operating humidity: 90% maximum relative humidity, non-condensing |
|
|
Storage humidity: 95% maximum relative humidity, non-condensing |
|
|
Operating altitude: 10,000 ft (3,000 m) maximum |
|
|
Storage altitude: 10,000 ft (3,000 m) maximum |
|
|
Electromagnetic Emissions |
CE mark, commercial |
|
FCC Part 15 Class B |
|
|
VCCI Class B |
|
|
EN 55022 (CISPR 22), Class B |
|
Product |
9-PORT 10/100 SWITCH WITH 4-PORT POE+ |
|
Type |
POE31804P-at |
|
Network Ports |
9 10/100Mbps RJ45 PortsAUTO Negotiation/AUTO MDI/MDIX |
|
Power Pin Assignment |
Data provided over pairs over 1/2and 3/6 ,Power over |
|
PoE Distance |
100m |
|
Transmission Method |
Store-And-Forward |
|
Network Media |
10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) |
|
100BASE-TX: UTP category 5, 5e cable (maximum 100m) |
|
|
Performance Specifications |
Bandwidth:1.6 Gbps |
|
Network latency:Less than 20 μs for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission |
|
|
Buffer memory:96 KB embedded memory per unit |
|
|
Address database size:1,000 media access control (MAC) addresses per system |
|
|
Addressing:48-bit MAC address |
|
|
Mean Time Between Failure (MTBF):190,000 hours (~ 21 years) |
|
|
Acoustic Noise: 0 dB |
|
|
Network Protocol and Standards |
IEEE 802.3i 10BASET |
|
IEEE 802.3u 100BASETX |
|
|
IEEE 802.3x Flow Control |
|
|
IEEE 802.1at DTE Power via MDI |
|
|
IEEE 802.3at |
|
|
Status LEDs |
System: Power, PoE Maximum Power |
|
Per Port: Link, Activity, Speed, PoE Active, PoE Fault |
|
|
Power Supply |
Total Power Consumption: 120 W maximum |
|
PoE Watt budget: 110W |
|
|
IEEE802.3at Power Consumption: 110 W maximum (Ports 1 – 4) |
|
|
48VDC,2.5A power output; plug is localized to country of sale |
|
|
Physical Specifications |
Dimensions (H x W x D):28 x 108 x 189mm |
|
Weight:0.65kg |
|
|
Environmental Specifications |
Operating temperature: 0 to 55°C |
|
Storage temperature: -20 to 75°C |
|
|
Operating humidity: 90% maximum relative humidity, non-condensing |
|
|
Storage humidity: 95% maximum relative humidity, non-condensing |
|
|
Operating altitude: 10,000 ft (3,000 m) maximum |
|
|
Storage altitude: 10,000 ft (3,000 m) maximum |
|
|
Electromagnetic Emissions |
CE mark, commercial |
|
FCC Part 15 Class B |
|
|
VCCI Class B |
|
|
EN 55022 (CISPR 22), Class B |