| Hãng sản xuất | Checkline |
Thiết bị đo lực căng hiện số giới hạn đầu vào
4 dải lên đến 2000 g
Sử dụng cho đo trong khu vực hạn chế không gian
Roller shifting mechanism ensures easy acquisition of the running material
Small measuring head, allows access where space is limited or where filaments run close together
Turned-up outer finger edges guide the running filament into the roller grooves
Calibration to customer supplied material is available
Tension Ranges
| Model | Range | Resolution | Measuring Head Width mm |
| DTFB-200 DTFX-200 |
2.0-200.0 g | 0.1 g | 38 |
| DTFB-500 DTFX-500 |
5.0-500.0 g | 0.1 g | 38 |
| DTFB-1K DTFX-1K |
50-1000 g | 1 g | 38 |
| DTFB-2K DTFX-2K |
200-2000 g | 1 g | 38 |
| Other units of measure available. |
Measuring Head Dimensions
Guide Rollers
| Order Code | Line Speed ...m/min |
Roller Material |
| Standard | 900 | Hardcoated aluminium |
| Code K | 2000 | Hardcoated aluminum |
| Code T | 450 | Plastic (POM) black |
| Code W | 450 | Nickel-plated steel |
| Accuracy | From 10% up to 90% of tension range: ±0.5% full scale and ±1 digit remaining tension range and other calibration material: ± 3% full scale and ±1 digit |
| Overrange | Approx. 15% full scale, without accuracy guarantee |
| Overload protection | 100% of tension range |
| Measuring principle | Strain gauge bridge |
| Measuring roller deflection | 0.2 mm max. |
| Converter | 12 bit A/D |
| Temperature Coefficient | Gain: less than ±0.01 % full scale/ºC Zero point: less than ±0.3 % full scale/ºC |
| Display | LCD 4 digit, 12 mm high |
| Display update rate | Adjustable 0.5, 1, 2 or 4 s (averaging) |
| Field adjustment | ±7 steps in 1.5 % increment |
| Memory | MIN, MAX, PEAK and last value |
| Temperature range | 10 -45 ºC |
| Air humidity | 85 % relative humidity, max. |
| Housing Dimensions | 235 x 76 x 45mm (LxWxH) |
| Expanded memory | Max. 100 readings, MAX, MIN, and PEAK as well as average values and standard deviation |
| Digital output signal | RS 232 C (4800, 8, N, 2) |
| Analog output signal | 0 - 1 V DC (converter rate 16 ms) |
| Digimatic interface | Mitutoyo |
Thiết bị đo lực căng hiện số giới hạn đầu vào
4 dải lên đến 2000 g
Sử dụng cho đo trong khu vực hạn chế không gian
Roller shifting mechanism ensures easy acquisition of the running material
Small measuring head, allows access where space is limited or where filaments run close together
Turned-up outer finger edges guide the running filament into the roller grooves
Calibration to customer supplied material is available
Tension Ranges
| Model | Range | Resolution | Measuring Head Width mm |
| DTFB-200 DTFX-200 |
2.0-200.0 g | 0.1 g | 38 |
| DTFB-500 DTFX-500 |
5.0-500.0 g | 0.1 g | 38 |
| DTFB-1K DTFX-1K |
50-1000 g | 1 g | 38 |
| DTFB-2K DTFX-2K |
200-2000 g | 1 g | 38 |
| Other units of measure available. |
Measuring Head Dimensions
Guide Rollers
| Order Code | Line Speed ...m/min |
Roller Material |
| Standard | 900 | Hardcoated aluminium |
| Code K | 2000 | Hardcoated aluminum |
| Code T | 450 | Plastic (POM) black |
| Code W | 450 | Nickel-plated steel |
| Accuracy | From 10% up to 90% of tension range: ±0.5% full scale and ±1 digit remaining tension range and other calibration material: ± 3% full scale and ±1 digit |
| Overrange | Approx. 15% full scale, without accuracy guarantee |
| Overload protection | 100% of tension range |
| Measuring principle | Strain gauge bridge |
| Measuring roller deflection | 0.2 mm max. |
| Converter | 12 bit A/D |
| Temperature Coefficient | Gain: less than ±0.01 % full scale/ºC Zero point: less than ±0.3 % full scale/ºC |
| Display | LCD 4 digit, 12 mm high |
| Display update rate | Adjustable 0.5, 1, 2 or 4 s (averaging) |
| Field adjustment | ±7 steps in 1.5 % increment |
| Memory | MIN, MAX, PEAK and last value |
| Temperature range | 10 -45 ºC |
| Air humidity | 85 % relative humidity, max. |
| Housing Dimensions | 235 x 76 x 45mm (LxWxH) |
| Expanded memory | Max. 100 readings, MAX, MIN, and PEAK as well as average values and standard deviation |
| Digital output signal | RS 232 C (4800, 8, N, 2) |
| Analog output signal | 0 - 1 V DC (converter rate 16 ms) |
| Digimatic interface | Mitutoyo |