Thiết bị chuyển mạch HPE JH179A FlexFabric 5930 4-slot Switch

0^₫

Số cổng kết nối	RJ45
Hãng sản xuất	HPE
MAC Address Table	Đang chờ cập nhật
Tốc độ truyền dữ liệu	10/100/1000 Mbps
Số cổng kết nối (2)	Đang chờ cập nhật

Thiết bị chuyển mạch HPE JH179A được thiết kế để hoạt động phù hợp cả 3 lớp mạng (lớp truy nhập mạng đầu cuối) với chi phí đầu tư là thấp trong dòng HPE FlexFabric 5930 Switch Series. Thiết bị chuyển mạch HPE JH179A cung cấp 4 module slots để kết nối, sử dụng trong các mạng doanh nghiệp vừa và nhỏ, các trung tâm dữ liệu..... Thiết bị chuyển mạch HPE JH179A tăng cường bảo mật bằng cách sử dụng các công nghệ virtual LANs, link aggregation, hoặc IGMP Snooping boost uplink performance, và loop prevention enhances network reliability. Switch HPE JH179A sử dụng điện AC 220V.

ấp

Thiết bị chuyển mạch HPE JH179A dụng cho việc cung cấp kết nối mạng LAN đến các máy tính làm việc và các thiết bị cần kết nối mạng như bộ phát không dây wifi, máy in, máy chủ, IP camera … Dòng switch HPE JH179A tiết kiệm chi phí và rất hiệu quả cho việc cung cấp kết nối mạng, với mức tiêu thụ nguồn điện thấp.

Thiết bị chuyển mạch HPE JH179A cho phép dễ dàng quản lý ngay cả bởi người dùng không biết kỹ thuật thông qua giao diện Wed trực quan, hỗ trợ HTTP và HTTP Secure (HTTPS)

Thiết bị chuyển mạch HPE JH179A được thiết kế theo chuẩn EIA 1U phù hợp với tất cả các loại tủ rack hoặc gắn trên tường.

chi tiết của thiết bị chuyển mạch HPE JH179A:

I/O ports and slots	4 module slots
Additional ports and slots	1 RJ-45 serial console port 1 RJ-45 out-of-band management port 1 USB 2.0
Power supplies	4 power supply slots 2 minimum power supplies required (ordered separately)
Fan tray	2 fan tray slots The customer must order fan trays, as fan trays are not included with the switch. This system requires two same-direction airflow fan trays to function properly. The system should not be operated with only one fan tray for more than 24 hours. The system should not be operated without a fan tray for more than two minutes. The system should not be operated outside of the temperature range of 32°F (0°C) to 113°F (45°C). Failure to comply with these operating requirements may void the product warranty
Physical characteristics	Dimensions: 17.32(w) x 25.98(d) x 3.47(h) in (44.00 x 66.0 x 8.81 cm) (2U height) Weight: 66.14 lb (30 kg) shipping weight
Memory and processor	1 GB flash; Packet buffer size: 12.2 MB, 4 GB SDRAM
Mounting and enclosure	wall, desktop and under table mounting
Performance	10 Gbps Latency < 1µs (64-byte packets) ThrougHPEut up to 1429 Mpps Switching capacity: 2560 Gbps Routing table size 128000 entries (IPv4), 64000 entries (IPv6) MAC address table size 288000 entries
Environment	Operating temperature: 32°F to 113°F (0°C to 45°C) Operating relative humidity: 10% to 90%, noncondensing Nonoperating/Storage temperature:-40°F to 158°F (-40°C to 70°C) Nonoperating/Storage relative humidity:5% to 95% @ 140°F (60°C) Acoustic: Low-speed fan: 59.8 dB, High-speed fan: 74.4 dB
Electrical characteristics	Frequency: 50/60 Hz Maximum heat dissipation 474/3030 BTU/hr (500.07/3196.65 kJ/hr) Voltage: 100 - 240 VAC, rated -40 to -60 VDC, rated(depending on power supply chosen) Maximum power rating: 888 W Idle power: 139 W Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
Safety	UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance
Emissions	VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
Management	IMC - Intelligent Management Center; Command-line interface; Out-of-band management; SNMP manager; Telnet; FTP

Các loại Module quang HPE được sử dụng cho switch HPE JH179A:

JD092B HPE X130 10G SFP+ LC SR Transceiver

JD094B HPE X130 10G SFP+ LC LR Transceiver

JG234A HPE X130 10G SFP+ LC ER 40km Transceiver

JD119B HPE X120 1G SFP LC LX Transceiver

JD118B HPE X120 1G SFP LC SX Transceiver

JD089B HPE X120 1G SFP RJ45 T Transceiver

JD061A HPE X125 1G SFP LC LH40 1310nm Transceiver

JD062A HPE X120 1G SFP LC LH40 1550nm Transceiver

JD063B HPE X125 1G SFP LC LH70 Transceiver

JL251A HPE X140 40G QSFP+ LC BiDi 100m MM Transceiver

JG661A HPE X140 40G QSFP+ LC LR4 SM 10km 1310nm Transceiver

JG325B HPE X140 40G QSFP+ MPO SR4 Transceiver

JL306A HPE X140 40G QSFP+ LC ER4 40km SM Transceiver

JG709A HPE X140 40G QSFP+ MPO MM 850nm CSR4 300m Transceiver

Các loại cable DAC HPE - Direct attack copper sử dụng cho switch HPE JH179A:

JD095C HPE FlexNetwork X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable

JD096C HPE FlexNetwork X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable

JD097C HPE FlexNetwork X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

JG081C HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable

JC784C HPE FlexNetwork X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable

JG326A HPE FlexNetwork X240 40G QSFP+ QSFP+ 1m Direct Attach Copper Cable

JG327A HPE FlexNetwork X240 40G QSFP+ QSFP+ 3m Direct Attach Copper Cable

JG328A HPE FlexNetwork X240 40G QSFP+ QSFP+ 5m Direct Attach Copper Cable

JG329A HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 1m Direct Attach Copper Splitter Cable

JG330A HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 3m Direct Attach Copper Splitter Cable

JG331A HPE FlexNetwork X240 40G QSFP+ to 4x10G SFP+ 5m Direct Attach Copper Splitter Cable

JL290A HPE X2A0 10G SFP+ to SFP+ 7m Active Optical Cable

JL291A HPE X2A0 10G SFP+ to SFP+ 10m Active Optical Cable

JL292A HPE X2A0 10G SFP+ to SFP+ 20m Active Optical Cable

JL287A HPE X2A0 40G QSFP+ to QSFP+ 7m Active Optical Cable

JL288A HPE X2A0 40G QSFP+ to QSFP+ 10m Active Optical Cable

JL289A HPE X2A0 40G QSFP+ to QSFP+ 20m Active Optical Cable

Các loại FC transceiver sử dụng cho switch HPE JH179A:

H6Z42A HPE StoreFabric 16Gb FC/10GbE 100m SR SFP+ Transceiver

AJ718A HPE 8Gb Short Wave Fibre Channel SFP+ 1 Pack

AW584A HPE 8Gb Long Wave 10km Fibre Channel SFP+ 1 Pack Transceiver

Các loại module HPE sử dụng cho switch HPE JH179A:

JH180A HPE 5930 24-port SFP+ and 2-port QSFP+ Module

JH181A HPE 5930 24-port SFP+ and 2-port QSFP+ with MACsec Module

JH182A HPE 5930 24-port 10GBASE-T and 2-port QSFP+ with MACsec Module

JH183A HPE 5930 8-port QSFP+ Module

JH184A HPE 5930 24-port Converged Port and 2-port QSFP+ Module

Các loại nguồn switch HPE sử dụng cho switch HPE JH179A:

JC680A HPE 58x0AF 650W AC Power Supply

JC681A HPE 58x0AF 650W DC Power Supply

JH336A HPE FlexFabric Switch 650W 48V Hot Plug NEBS-compliant DC Power Supply

Các loại Fan Tray HPE sử dụng cho switch HPE JH179A:

JH185A HPE 5930 4-slot Back (Power Side) to Front (Port Side) Airflow Fan Tray

JH186A HPE 5930 4-slot Front (Port Side) to Back (Power Side) Airflow Fan Tray

Quý khách có thể tham khảo thêm các dòng switch HPE FlexFabric 5930 Switch Series:

JG726A HPE FlexFabric 5930 32QSFP+ Switch

JH179A HPE FlexFabric 5930 4-slot Switch

JH178A HPE FlexFabric 5930 2QSFP+ 2-slot Switch

ấp

Thiết bị chuyển mạch HPE JH179A được thiết kế theo chuẩn EIA 1U phù hợp với tất cả các loại tủ rack hoặc gắn trên tường.

chi tiết của thiết bị chuyển mạch HPE JH179A:

I/O ports and slots	4 module slots
Additional ports and slots	1 RJ-45 serial console port 1 RJ-45 out-of-band management port 1 USB 2.0
Power supplies	4 power supply slots 2 minimum power supplies required (ordered separately)
Fan tray	2 fan tray slots The customer must order fan trays, as fan trays are not included with the switch. This system requires two same-direction airflow fan trays to function properly. The system should not be operated with only one fan tray for more than 24 hours. The system should not be operated without a fan tray for more than two minutes. The system should not be operated outside of the temperature range of 32°F (0°C) to 113°F (45°C). Failure to comply with these operating requirements may void the product warranty
Physical characteristics	Dimensions: 17.32(w) x 25.98(d) x 3.47(h) in (44.00 x 66.0 x 8.81 cm) (2U height) Weight: 66.14 lb (30 kg) shipping weight
Memory and processor	1 GB flash; Packet buffer size: 12.2 MB, 4 GB SDRAM
Mounting and enclosure	wall, desktop and under table mounting
Performance	10 Gbps Latency < 1µs (64-byte packets) ThrougHPEut up to 1429 Mpps Switching capacity: 2560 Gbps Routing table size 128000 entries (IPv4), 64000 entries (IPv6) MAC address table size 288000 entries
Environment	Operating temperature: 32°F to 113°F (0°C to 45°C) Operating relative humidity: 10% to 90%, noncondensing Nonoperating/Storage temperature:-40°F to 158°F (-40°C to 70°C) Nonoperating/Storage relative humidity:5% to 95% @ 140°F (60°C) Acoustic: Low-speed fan: 59.8 dB, High-speed fan: 74.4 dB
Electrical characteristics	Frequency: 50/60 Hz Maximum heat dissipation 474/3030 BTU/hr (500.07/3196.65 kJ/hr) Voltage: 100 - 240 VAC, rated -40 to -60 VDC, rated(depending on power supply chosen) Maximum power rating: 888 W Idle power: 139 W Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
Safety	UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance
Emissions	VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN 61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A
Management	IMC - Intelligent Management Center; Command-line interface; Out-of-band management; SNMP manager; Telnet; FTP