| Hãng sản xuất | Hilscher |
| Giao tiếp máy tính | PCI |
| Số cổng ra | 0 |
:
| Product | Product name | CIFX 50-DP |
| Part number | 1250.410 | |
| Brief description | PC Card cifX PCI PROFIBUS DP Master or Slave or PROFIBUS MPI Device | |
| Function | Communication interface with PCI and PROFIBUS interface | |
| Communication controller | Type | netX 100 |
| Integrated Memory | RAM | 8 MB SDRAM |
| FLASH | 4 MB serial Flash EPROM | |
| System interface | Bus type | PCI |
| Transmission rate | 33 MHz | |
| Data access | DPM or DMA (Direct Memory Access) | |
| Data width | 32-Bit | |
| Communication interface | Communication standard | PROFIBUS |
| Interface type | RS-485, isolated | |
| Isolation voltage | 1000 V DC (tested for 1 minute) | |
| Connector | D-Sub, female, 9-pin | |
| Power supply | Supply voltage | +3.3 V DC ±5 % |
| Maximum current (typically) | 700 mA (at 3,3 V) | |
| Connector | via PCI Bus | |
| Displays | LED display | SYS, System status LED |
| COM, LED Communication status (duo LED) | ||
| Operating element | Rotary switch slot number (card ID) | To set the slot number (card ID) |
| Permitted ambient conditions | Operating temperature range | -20 °C ... +70 °C (Air flow during measurment: 0,5 m/s) |
| Storage temperature range | -10 °C ... +70 °C | |
| Humidity | 10 % … 95 % relative humidity, no condensation permitted | |
| Environment | For UL compliant usage: The device must be used in a pollution degree 2 environment. | |
| Device | Dimensions (L x W x H) | 120,0 x 86 x 18,5 mm (from hardware revision 5) |
| Mounting/Installation | PCI slot (3,3 V) | |
| Conformity | RoHS | Yes |
| Conformance with EMC directives | CE sign | Yes |
| Emission | EN 55011:2009 + A1:2010, CISPR 11:2009, Class A (Radio disturbance characteristics - Limits and methods of measurement) | |
| Immunity | EN 61000-4-2:2009 (Electrostatic discharge test) | |
| EN 61000-4-3:2006 + A1:2008 + A2:2010 (Radiated, radio-frequency, electromagnetic field test) | ||
| EN 61000-4-4:2004 + A1:2010 (Burst Electrical fast transients/burst test) | ||
| EN 61000-4-5:2006 (Surge test) | ||
| EN 61000-4-6:2009 (to conducted disturbances, induced by radio- frequency fields) | ||
| EN 61000-4-8:2010 (power frequency magnetic field test) | ||
| EN 61000-6-2:2005 + B1:2011 (for industrial environments) | ||
| UL certification | UL | The device is certified according to UL 508 |
| UL file | UL-File-Nr. E221530 | |
| Configuration | Configuration software for master and Slave | SYCON.net |
| Configuration software Slave | netX Configuration Tool |
:
| Product | Product name | CIFX 50-DP |
| Part number | 1250.410 | |
| Brief description | PC Card cifX PCI PROFIBUS DP Master or Slave or PROFIBUS MPI Device | |
| Function | Communication interface with PCI and PROFIBUS interface | |
| Communication controller | Type | netX 100 |
| Integrated Memory | RAM | 8 MB SDRAM |
| FLASH | 4 MB serial Flash EPROM | |
| System interface | Bus type | PCI |
| Transmission rate | 33 MHz | |
| Data access | DPM or DMA (Direct Memory Access) | |
| Data width | 32-Bit | |
| Communication interface | Communication standard | PROFIBUS |
| Interface type | RS-485, isolated | |
| Isolation voltage | 1000 V DC (tested for 1 minute) | |
| Connector | D-Sub, female, 9-pin | |
| Power supply | Supply voltage | +3.3 V DC ±5 % |
| Maximum current (typically) | 700 mA (at 3,3 V) | |
| Connector | via PCI Bus | |
| Displays | LED display | SYS, System status LED |
| COM, LED Communication status (duo LED) | ||
| Operating element | Rotary switch slot number (card ID) | To set the slot number (card ID) |
| Permitted ambient conditions | Operating temperature range | -20 °C ... +70 °C (Air flow during measurment: 0,5 m/s) |
| Storage temperature range | -10 °C ... +70 °C | |
| Humidity | 10 % … 95 % relative humidity, no condensation permitted | |
| Environment | For UL compliant usage: The device must be used in a pollution degree 2 environment. | |
| Device | Dimensions (L x W x H) | 120,0 x 86 x 18,5 mm (from hardware revision 5) |
| Mounting/Installation | PCI slot (3,3 V) | |
| Conformity | RoHS | Yes |
| Conformance with EMC directives | CE sign | Yes |
| Emission | EN 55011:2009 + A1:2010, CISPR 11:2009, Class A (Radio disturbance characteristics - Limits and methods of measurement) | |
| Immunity | EN 61000-4-2:2009 (Electrostatic discharge test) | |
| EN 61000-4-3:2006 + A1:2008 + A2:2010 (Radiated, radio-frequency, electromagnetic field test) | ||
| EN 61000-4-4:2004 + A1:2010 (Burst Electrical fast transients/burst test) | ||
| EN 61000-4-5:2006 (Surge test) | ||
| EN 61000-4-6:2009 (to conducted disturbances, induced by radio- frequency fields) | ||
| EN 61000-4-8:2010 (power frequency magnetic field test) | ||
| EN 61000-6-2:2005 + B1:2011 (for industrial environments) | ||
| UL certification | UL | The device is certified according to UL 508 |
| UL file | UL-File-Nr. E221530 | |
| Configuration | Configuration software for master and Slave | SYCON.net |
| Configuration software Slave | netX Configuration Tool |