Xuất xứ | Đang cập nhật |
Loại | Mỡ chịu nhiệt |
Hãng sản xuất | Đang cập nhật |
FEATURES
COMPOSITION
thickener
Synthetic grease handles high speed, high load, high temperature combinations
APPLICATIONS
TYPICAL PROPERTIES
Specification Writers: Please contact your local Windoline sales office or your
Global Windoline Connection before writing specifications on this product.
Method Test Unit Result Color Red Oil Base Ester
Base Oil Viscosity, at 38°C (100°F) SUS 200
Thickener PTFE Specific Gravity 1.01
ASTM D 217 Penetration, worked 60 mm/10 270
Service Temperature Range, estimated °C -45 to 260
ASTM D 566 Dropping Point °C Not measurable
ASTM D 1264 Water Washout percent 2
Fed Std 791C Oil Separation,
24 hr at 150°C (302°F) percent 2.2
ASTM D 2596 Four-Ball Test, Weld Load kg 265
ASTM D 2266 Four-Ball Test, Wear Scar, 1 hour at
75°C (167°F), 400 N mm 0.87
Dn Value (shaft size of bearing in
mm x rpm), estimated 550,000
Almen-Wieland Machine OK Load N 20,000
ASTM D 1478 Low Temperature Torque Test
-20°C (-4°F) N•m 207 x 10 -3
-50°C (-58°F) N•m 530 x 10 -3
ASTM D 1478 Low Temperature Torque Test, after 20 minute run -3
-20°C (-4°F) N•m 130 x 10
-50°C (-58°F) N•m 130 x 10 -3
FAG Bearing Test, angular contact thrust ball bearings
160°C (320°F), 1500 N, 6000 rpm hours 662
DIN 51802 Corrosion Protection, SKF Emcor rating 1-2
1
Dn values are calculated approximations and will vary widely with temperature, load and bearing type.
DESCRIPTION
Windoline 444® High Perform-ance
Synthetic Grease is a synthetic complex grease with outstanding properties including a wide temper- ature range estimated at -45 to
260°C and a high load-carrying
capacity. It combines the most impor-
tant properties of silicone grease (wide temperature range) and solid lubricant-containing PTFE greases (high load-carrying capacity) in an ester-based grease.
FEATURES
COMPOSITION
thickener
Synthetic grease handles high speed, high load, high temperature combinations
APPLICATIONS
TYPICAL PROPERTIES
Specification Writers: Please contact your local Windoline sales office or your
Global Windoline Connection before writing specifications on this product.
Method Test Unit Result Color Red Oil Base Ester
Base Oil Viscosity, at 38°C (100°F) SUS 200
Thickener PTFE Specific Gravity 1.01
ASTM D 217 Penetration, worked 60 mm/10 270
Service Temperature Range, estimated °C -45 to 260
ASTM D 566 Dropping Point °C Not measurable
ASTM D 1264 Water Washout percent 2
Fed Std 791C Oil Separation,
24 hr at 150°C (302°F) percent 2.2
ASTM D 2596 Four-Ball Test, Weld Load kg 265
ASTM D 2266 Four-Ball Test, Wear Scar, 1 hour at
75°C (167°F), 400 N mm 0.87
Dn Value (shaft size of bearing in
mm x rpm), estimated 550,000
Almen-Wieland Machine OK Load N 20,000
ASTM D 1478 Low Temperature Torque Test
-20°C (-4°F) N•m 207 x 10 -3
-50°C (-58°F) N•m 530 x 10 -3
ASTM D 1478 Low Temperature Torque Test, after 20 minute run -3
-20°C (-4°F) N•m 130 x 10
-50°C (-58°F) N•m 130 x 10 -3
FAG Bearing Test, angular contact thrust ball bearings
160°C (320°F), 1500 N, 6000 rpm hours 662
DIN 51802 Corrosion Protection, SKF Emcor rating 1-2
1
Dn values are calculated approximations and will vary widely with temperature, load and bearing type.
DESCRIPTION
Windoline 444® High Perform-ance
Synthetic Grease is a synthetic complex grease with outstanding properties including a wide temper- ature range estimated at -45 to
260°C and a high load-carrying
capacity. It combines the most impor-
tant properties of silicone grease (wide temperature range) and solid lubricant-containing PTFE greases (high load-carrying capacity) in an ester-based grease.