Hãng sản xuất | KRAMER |
This unit does not convert from analog to digital and was designed for SDI video even though it uses an analog signal for timing reference.
Input | SDI Video x8, up to 360 Mb/s @ 75 ohms, on BNC connectors RS-232, on a 9-Pin connector Sync, Looping, @ 75 ohms, analog composite, on BNC connectors RS-485, on a Phoenix connector |
Output | SDI Video x8, up to 360 Mb/s @ 75 ohms, on BNC connectors RS-232, on a 9-Pin connector |
Switch Type | Vertical Interval Front Panel Touch Switches Remote via RS-232 and RS-485 |
Video Bandwidth | 8 Bit or 10 Bit |
Differential Gain | Not Specified by Manufacturer |
Differential Phase | Not Specified by Manufacturer |
Video Signal-to-Noise Ratio | Not Specified by Manufacturer |
Control | Front Panel Touch Switches Remote via RS-232 and RS-485 Rear Panel Termination on Inputs |
Power Source | 85 to 264 VAC @ 47-440 Hz |
Dimensions (WxDxH) | 19 x 7 x 1.75 48.26 x 17.78 x 4.45cm |
Weight | 7.8 lbs 3.5 kg |
This unit does not convert from analog to digital and was designed for SDI video even though it uses an analog signal for timing reference.
Input | SDI Video x8, up to 360 Mb/s @ 75 ohms, on BNC connectors RS-232, on a 9-Pin connector Sync, Looping, @ 75 ohms, analog composite, on BNC connectors RS-485, on a Phoenix connector |
Output | SDI Video x8, up to 360 Mb/s @ 75 ohms, on BNC connectors RS-232, on a 9-Pin connector |
Switch Type | Vertical Interval Front Panel Touch Switches Remote via RS-232 and RS-485 |
Video Bandwidth | 8 Bit or 10 Bit |
Differential Gain | Not Specified by Manufacturer |
Differential Phase | Not Specified by Manufacturer |
Video Signal-to-Noise Ratio | Not Specified by Manufacturer |
Control | Front Panel Touch Switches Remote via RS-232 and RS-485 Rear Panel Termination on Inputs |
Power Source | 85 to 264 VAC @ 47-440 Hz |
Dimensions (WxDxH) | 19 x 7 x 1.75 48.26 x 17.78 x 4.45cm |
Weight | 7.8 lbs 3.5 kg |