| Xuất xứ | Mỹ |
| Hãng sản xuất | Insteon |
| Loại thiết bị | Công tắc điều khiển |
| General | ||
| Brand: | Insteon | |
| Manufacturer Product No.: | 2475SDB, In-LineLinc Relay - Insteon Remote Control In-Line On/Off Switch (Dual-Band) | |
| UPC: | 8.13922E+11 | |
| Patent No.: | U.S. Patent No. 7,345,998, International patents pending | |
| Operation | ||
| Operation Modes: | Insteon | |
| LED Indicator: | Green when load is on and red when load is off | |
| Multi-Way Circuit Support: | Yes, as a receiver and as a controller | |
| Setup Memory: | Non-volatile EEPROM | |
| Insteon Features | ||
| Insteon ID: | 1 | |
| Maximum Scene Links: | 417 | |
| Scene Commands Supported as Responder: | On | Off |
| Software Configurable: | Yes, Always | |
| RF Range: | 150' Open air | |
| Mechanical | ||
| Mounting: | Mounts inside lighting ballast box in the ceiling or in the wall | |
| Wires: | Colors: | |
| White - Neutral 18 gauge | ||
| Black - Hot 12 Gauge | ||
| Red - Load 12 Gauge | ||
| Copper - Earth Ground 12 Gauge | ||
| Beeper: | Yes | |
| Operating Conditions: | Indoors, 32 to 104° F, up to 85% relative humidity | |
| Dimensions: | 2.77" H x 1.75" W x 1.47" D | |
| Weight: | 4.2 ounces | |
| Electrical | ||
| Voltage: | 120VAC +/- 10%, Single phase | |
| 277VAC +/- 10%, One phase of a three phase system | ||
| Frequency: | 60Hz | |
| Load Types: | Wired-in incandescent lighting and inductive loads | |
| Maximum Load: | 20 Amps;1800 Watts (for incandescent loads) | |
| Power Consumption: | <1 Watt | |
| Certification: | Safety tested for use in USA and Canada (UL-508-2010, CSA C22.2 #14-2010) | |
| General | ||
| Brand: | Insteon | |
| Manufacturer Product No.: | 2475SDB, In-LineLinc Relay - Insteon Remote Control In-Line On/Off Switch (Dual-Band) | |
| UPC: | 8.13922E+11 | |
| Patent No.: | U.S. Patent No. 7,345,998, International patents pending | |
| Operation | ||
| Operation Modes: | Insteon | |
| LED Indicator: | Green when load is on and red when load is off | |
| Multi-Way Circuit Support: | Yes, as a receiver and as a controller | |
| Setup Memory: | Non-volatile EEPROM | |
| Insteon Features | ||
| Insteon ID: | 1 | |
| Maximum Scene Links: | 417 | |
| Scene Commands Supported as Responder: | On | Off |
| Software Configurable: | Yes, Always | |
| RF Range: | 150' Open air | |
| Mechanical | ||
| Mounting: | Mounts inside lighting ballast box in the ceiling or in the wall | |
| Wires: | Colors: | |
| White - Neutral 18 gauge | ||
| Black - Hot 12 Gauge | ||
| Red - Load 12 Gauge | ||
| Copper - Earth Ground 12 Gauge | ||
| Beeper: | Yes | |
| Operating Conditions: | Indoors, 32 to 104° F, up to 85% relative humidity | |
| Dimensions: | 2.77" H x 1.75" W x 1.47" D | |
| Weight: | 4.2 ounces | |
| Electrical | ||
| Voltage: | 120VAC +/- 10%, Single phase | |
| 277VAC +/- 10%, One phase of a three phase system | ||
| Frequency: | 60Hz | |
| Load Types: | Wired-in incandescent lighting and inductive loads | |
| Maximum Load: | 20 Amps;1800 Watts (for incandescent loads) | |
| Power Consumption: | <1 Watt | |
| Certification: | Safety tested for use in USA and Canada (UL-508-2010, CSA C22.2 #14-2010) | |