Hexin TU8003-L Embedded RS232 RS485 Serial to Ethernet

Model: TU8003-L

Name: Embedded RS232 RS485 Serial to Ethernet Device Server Module

Feature

• 10/100M adaptive Ethernet interface
• support AUTO MDI / MDIX, Use crossover cable or parallel cable connection
• 115.2kbps and more baud rate can be selected in manual or automatic settings ;
• Working method: TCP Sever, TCP Client, UDP mode
• supports virtual serial port
• working port , destination IP address and port number are our management software can easily set up
• configuration module parameters through the serial port by AT commands
• disconnected from the network can be automatically disconnected , ensure that the entire network and reliable TCP connection ;
• The flexible serial data sub-frame is set to meet user demand for subcontracting ;
• Provide supporting TCPIP dimensional machine programming information ;
• UDP packet radio mode banned , anti-interference ability than similar products ;
• In the case of high-speed data transceiver , heat is still relatively low.
• support the DNS dynamic domain remote connections.
• 2 serial port can sending and receiving data at the same time 

Specification

• UART1 Baud Rate : 300bps ~ 1.8432Mbps
• Parity: None , Odd , even parity
• data bits : 7,8 bit
• Stop bit : 1,2 bit
• Flow control: no flow control , RTS / CTS
• Baud rate : 1.2kbps ~ 4.8kbps
• Parity: No parity
• data bits : 8 bit
• Stop bit : 1,2 bit
• Flow control: no flow control
• working environment : -45 ~ 85 ℃, 5 ~ 95%
• humidity Storage environment : -55 ~ 125 ℃,, 5 ~ 95% humidity
• Interface features: network interface complies with TCP / IP standard protocol , in line RS232/485/422 serial protocol
• Electrical Interface : Network interface bit RJ45 socket , serial interface bit 4 Terminal Block Interface
• Transmission medium : UTP shielded twisted pair cable
• working method: TCP Server mode , TCP Client mode , UDP mode , virtual serial port mode
• Transmission distance : RS485/422 interfaces 1200m; RS232 interfaces 15m
• Power Supply: 9~30V

Model: TU8003-L

Name: Embedded RS232 RS485 Serial to Ethernet Device Server Module

Feature

• 10/100M adaptive Ethernet interface
• support AUTO MDI / MDIX, Use crossover cable or parallel cable connection
• 115.2kbps and more baud rate can be selected in manual or automatic settings ;
• Working method: TCP Sever, TCP Client, UDP mode
• supports virtual serial port
• working port , destination IP address and port number are our management software can easily set up
• configuration module parameters through the serial port by AT commands
• disconnected from the network can be automatically disconnected , ensure that the entire network and reliable TCP connection ;
• The flexible serial data sub-frame is set to meet user demand for subcontracting ;
• Provide supporting TCPIP dimensional machine programming information ;
• UDP packet radio mode banned , anti-interference ability than similar products ;
• In the case of high-speed data transceiver , heat is still relatively low.
• support the DNS dynamic domain remote connections.
• 2 serial port can sending and receiving data at the same time 

Specification

• UART1 Baud Rate : 300bps ~ 1.8432Mbps
• Parity: None , Odd , even parity
• data bits : 7,8 bit
• Stop bit : 1,2 bit
• Flow control: no flow control , RTS / CTS
• Baud rate : 1.2kbps ~ 4.8kbps
• Parity: No parity
• data bits : 8 bit
• Stop bit : 1,2 bit
• Flow control: no flow control
• working environment : -45 ~ 85 ℃, 5 ~ 95%
• humidity Storage environment : -55 ~ 125 ℃,, 5 ~ 95% humidity
• Interface features: network interface complies with TCP / IP standard protocol , in line RS232/485/422 serial protocol
• Electrical Interface : Network interface bit RJ45 socket , serial interface bit 4 Terminal Block Interface
• Transmission medium : UTP shielded twisted pair cable
• working method: TCP Server mode , TCP Client mode , UDP mode , virtual serial port mode
• Transmission distance : RS485/422 interfaces 1200m; RS232 interfaces 15m
• Power Supply: 9~30V