| Độ nhiễu âm thanh (dB) | 70 |
| Hãng sản xuất | CROWN |
| Công suất tiêu thụ (W) | 2100 |
| Sensitivity (volts RMS) for full rated power at 4 ohms |
1.4V
|
| Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) |
+0/–1 dB
|
| Signal to Noise Ratio (below rated 1 kHz power at 8 ohms), A-weighted |
100 dB (103 dB in XTi 6000)
|
| Damping Factor (8 ohm): 20 Hz to 400 Hz |
> 500
|
| Input Stage |
Input is electronically balanced and employs
precision 1% resistors. |
| AC Line Current (120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch) |
XTi 6000: 15.3A; at idle draws no more than 180 watts. |
| Crosstalk (below rated power) 20 Hz to 1 kHz |
> 70 dB
|
| Input Impedance (nominal) |
20 kilohms balanced, 10 kilohms unbalanced
|
| Load impedance (note: safe with all types of loads) Stereo Bridge mono |
2-8 ohms (4-8 ohms in XTi 1000 A1 100V versions)
4-16 ohms (8-16 ohms in XTi 1000 A1 100V versions) |
| Voltage Gain (at 1 kHz, 8 ohm rated output) |
XTi 6000: 37.1 dB.
|
| Maximum Input Signal |
+22 dBu typical
|
| Operating Temperature |
0° C to 40° C at 95% relative humidity
(non-condensing) |
| AC Line Voltage and Frequency Configurations Available (± 10%) |
100V, 120V, 220-240V 50/60 Hz
|
| Ventilation |
Flow-through ventilation from front to back
|
| Cooling |
Heat sinks and proportional-speed fan
|
| Dimensions: Width, Height, Depth (behind mounting surface) |
EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x12.25 in. (31.1cm) D
XTi 6000 is 16.2 in. (41.15 cm) D |
| Net Weight, Shipping Weight |
XTi 6000 is 24.0 lb (10.9 kg), 30.0 lb (13.6 kg) |
| Sensitivity (volts RMS) for full rated power at 4 ohms |
1.4V
|
| Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) |
+0/–1 dB
|
| Signal to Noise Ratio (below rated 1 kHz power at 8 ohms), A-weighted |
100 dB (103 dB in XTi 6000)
|
| Damping Factor (8 ohm): 20 Hz to 400 Hz |
> 500
|
| Input Stage |
Input is electronically balanced and employs
precision 1% resistors. |
| AC Line Current (120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch) |
XTi 6000: 15.3A; at idle draws no more than 180 watts. |
| Crosstalk (below rated power) 20 Hz to 1 kHz |
> 70 dB
|
| Input Impedance (nominal) |
20 kilohms balanced, 10 kilohms unbalanced
|
| Load impedance (note: safe with all types of loads) Stereo Bridge mono |
2-8 ohms (4-8 ohms in XTi 1000 A1 100V versions)
4-16 ohms (8-16 ohms in XTi 1000 A1 100V versions) |
| Voltage Gain (at 1 kHz, 8 ohm rated output) |
XTi 6000: 37.1 dB.
|
| Maximum Input Signal |
+22 dBu typical
|
| Operating Temperature |
0° C to 40° C at 95% relative humidity
(non-condensing) |
| AC Line Voltage and Frequency Configurations Available (± 10%) |
100V, 120V, 220-240V 50/60 Hz
|
| Ventilation |
Flow-through ventilation from front to back
|
| Cooling |
Heat sinks and proportional-speed fan
|
| Dimensions: Width, Height, Depth (behind mounting surface) |
EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x12.25 in. (31.1cm) D
XTi 6000 is 16.2 in. (41.15 cm) D |
| Net Weight, Shipping Weight |
XTi 6000 is 24.0 lb (10.9 kg), 30.0 lb (13.6 kg) |