Cân băng tải kiểm hàng Dini Argeo DLW10/6510

WEIGHT AND CHECK FUNCTIONS

Static or dynamic weighing of packs, both automatically as well as semiautomatically with the operator.

Management of the cadence belt, for optimising the number of packs per minute weighed by the instrument (cadence belt not included), through cadence photo cell (optional).

Setting of the density coefficient for each article, for weighing in ml.

Programmable alarm enabling and tolerance indication time.

Tolerance check:
- Upon target, through article database, with setting of 3 tolerance thresholds, for the physical division of the packs into 7 different groups.
- Upon programmable weight thresholds (min/max), with article database.
- Upon weight thresholds (min/max), with quick entry function.

Printout with each executed weigh with eventual automatic storage in the alibi memory.

Automatic printout and clearing of the partial total after a programmable number of weighs.

Static or dynamic automatic zero function of the belt (up to 2% of the capacity) after a programmable number of weighs.

Management of the automatic expulsion through its specific relay contact (expeller not included in the supply), or halt of the belts for manual expulsion or weight correction.

Possibility of connection to RS485 network or ethernet.

Programmable preset tare and enabling delay of the expeller for each article.

Automatic calculation of the weigh time and pack positioning, for optimising the functioning of the system.

Database of 1000 articles, with programmable alphanumeric description, density, targets, tolerance thresholds, and preset tare for each article.

Selection of the article through bar code reading.

Advanced bar code management, with the possibility of storing, processing, and printing 5 different codes.

Configuration and calibration of the instrument through the tool on the PC.

Report with date and time of cycle beginning and end with statistics of the checks and/or activities, standard deviation of the executed weighs, and totals by class and/or article.

Possibility of connection to a control light.

Available versions

WEIGHT AND CHECK FUNCTIONS

Static or dynamic weighing of packs, both automatically as well as semiautomatically with the operator.

Management of the cadence belt, for optimising the number of packs per minute weighed by the instrument (cadence belt not included), through cadence photo cell (optional).

Setting of the density coefficient for each article, for weighing in ml.

Programmable alarm enabling and tolerance indication time.

Tolerance check:
- Upon target, through article database, with setting of 3 tolerance thresholds, for the physical division of the packs into 7 different groups.
- Upon programmable weight thresholds (min/max), with article database.
- Upon weight thresholds (min/max), with quick entry function.

Printout with each executed weigh with eventual automatic storage in the alibi memory.

Automatic printout and clearing of the partial total after a programmable number of weighs.

Static or dynamic automatic zero function of the belt (up to 2% of the capacity) after a programmable number of weighs.

Management of the automatic expulsion through its specific relay contact (expeller not included in the supply), or halt of the belts for manual expulsion or weight correction.

Possibility of connection to RS485 network or ethernet.

Programmable preset tare and enabling delay of the expeller for each article.

Automatic calculation of the weigh time and pack positioning, for optimising the functioning of the system.

Database of 1000 articles, with programmable alphanumeric description, density, targets, tolerance thresholds, and preset tare for each article.

Selection of the article through bar code reading.

Advanced bar code management, with the possibility of storing, processing, and printing 5 different codes.

Configuration and calibration of the instrument through the tool on the PC.

Report with date and time of cycle beginning and end with statistics of the checks and/or activities, standard deviation of the executed weighs, and totals by class and/or article.

Possibility of connection to a control light.

Available versions