| Loại phụ kiện | Bộ điều khiển động cơ bước |
| Hãng sản xuất | Leadshine |
| Dùng cho máy | Máy cắt CNC |
| Xuất xứ | Trung Quốc |
Features
Heatsink integrated and connectors included
Input: 20-50 VDC
Output: 1.0 - 4.2A
Microstepping options: 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128; or 1/5, 1/10, 1/20, 1/25, 1/40, 1/50, 1/100, 1/125
DIP switch current options: 1.00A, 1.46A, 1.91A, 2.37A, 2.84A, 3.31A, 3.76A, 4.20A
Low motor heating because of the implementation of 3-state current control technology
Support: PULSE/DIRECTION & CW/CCW modes
Self-adjustment technology
Pulse input frequency up to 300 KHz
TTL compatible and optically isolated input
Automatic idle-current reduction
15 selectable resolutions, up to 25,600 steps/rev
Suitable for 2-phase and 4-phase motors
Short-voltage, over-voltage, over-current and over temperature protection
Dimensions: 4.65 X 2.97 X 1.30 inches; 10 oz
CE, ROHS certified
Specification
| Model: | M542-05 |
| Phase: | 2 |
| Control Mode: | Step & Dir, or CW/CCW |
| Max Input Frequency: | 300Khz |
| Input Voltage Range: | 20 - 50 VDC |
| Suggested Power Supply Voltage Range: | 24-48 VDC |
| Output Current: | 1.20 - 5.04 A |
| # of DIP Switch Resolution Configurations: | 15 |
| DIP Switch Resolution Setings: | 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000 |
| # of DIP Switch Current Configurations: | 8 |
| DIP Switch Current Configurations: | 1.20A, 1.75A, 2.29A, 2.84A, 3.41A, 3.97A, 4.51A, 5.04A |
| Logic Current Range: | 7-16mA (10mA typical) |
| Logic Voltage Range: | 4-5 VDC for pulse active high (default) , or 0-0.5V for pulse active low |
| Pulse enabled at: | Rising edge |
| # of Digital Inputs: | 3 |
| Step Width: | 1,500 ns |
| Minimal Direction Setup Time: | 5,000 ns |
| Isolation Resistance: | 500M Ohm |
| Environment: | Avoid dust, oil fog and corrosive gases |
| Ambient Temporature: | 0-50°C |
| Humidity: | 40–95% RH |
| Operating Temporature: | 0-70°C |
| Vibration: | 5.9 m/s2 Max |
| Storage Temporature: | -20-65°C |
| Specification: | 4.65 X 2.97 X 1.30 Inches |
| Weight: | 0.63 lb |
Features
Heatsink integrated and connectors included
Input: 20-50 VDC
Output: 1.0 - 4.2A
Microstepping options: 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128; or 1/5, 1/10, 1/20, 1/25, 1/40, 1/50, 1/100, 1/125
DIP switch current options: 1.00A, 1.46A, 1.91A, 2.37A, 2.84A, 3.31A, 3.76A, 4.20A
Low motor heating because of the implementation of 3-state current control technology
Support: PULSE/DIRECTION & CW/CCW modes
Self-adjustment technology
Pulse input frequency up to 300 KHz
TTL compatible and optically isolated input
Automatic idle-current reduction
15 selectable resolutions, up to 25,600 steps/rev
Suitable for 2-phase and 4-phase motors
Short-voltage, over-voltage, over-current and over temperature protection
Dimensions: 4.65 X 2.97 X 1.30 inches; 10 oz
CE, ROHS certified
Specification
| Model: | M542-05 |
| Phase: | 2 |
| Control Mode: | Step & Dir, or CW/CCW |
| Max Input Frequency: | 300Khz |
| Input Voltage Range: | 20 - 50 VDC |
| Suggested Power Supply Voltage Range: | 24-48 VDC |
| Output Current: | 1.20 - 5.04 A |
| # of DIP Switch Resolution Configurations: | 15 |
| DIP Switch Resolution Setings: | 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000 |
| # of DIP Switch Current Configurations: | 8 |
| DIP Switch Current Configurations: | 1.20A, 1.75A, 2.29A, 2.84A, 3.41A, 3.97A, 4.51A, 5.04A |
| Logic Current Range: | 7-16mA (10mA typical) |
| Logic Voltage Range: | 4-5 VDC for pulse active high (default) , or 0-0.5V for pulse active low |
| Pulse enabled at: | Rising edge |
| # of Digital Inputs: | 3 |
| Step Width: | 1,500 ns |
| Minimal Direction Setup Time: | 5,000 ns |
| Isolation Resistance: | 500M Ohm |
| Environment: | Avoid dust, oil fog and corrosive gases |
| Ambient Temporature: | 0-50°C |
| Humidity: | 40–95% RH |
| Operating Temporature: | 0-70°C |
| Vibration: | 5.9 m/s2 Max |
| Storage Temporature: | -20-65°C |
| Specification: | 4.65 X 2.97 X 1.30 Inches |
| Weight: | 0.63 lb |