Cảm Biến Quang Hàn Quốc Loại Phản Xạ Khi Gặp Vật, Giá Tốt

Liên hệ

Số 30, Ngõ 44, Đường Võ Thị Sáu, Hai Bà Trưng, Hà Nội



ModelThrough-BeamDiffusion ReflectionRetro Reflection
PR-T10NCPR-T10NPPR-R300NCPR-R300NPPR-M1NC, PR-M1NP
Sensing Distance10 m300 mm1 m(0.1-1 m)
Sensing Objectopaque object above Ø 10 mm

non-glossy and white
paper above 200 x 200 mm


transparent, translucent,
opaque object above Ø 25 mm
Hysteresis-Below 20 % of sensing distance-
Response TimeBelow 1 ms
Rated Voltage12 - 24 V DC ( ± 10 %)
Current ConsumptionBelow 35 mATransmitter:15 mA / Receiver:20 mA
Light SourceInfrared LED (Modulation Method)
Adjusting SensitivityBuilt-in Adjusting Sensitivity Volume (but, Through-Beam has only in the receiver)
Control Output

NPN Voltage Output, Loaded Voltage: below 30 V DC,
Loaded Current:below Max. 200 mA, Residual Voltage:below 1 V
Operation ModeBy control line, Light ON/ Dark ON / Selecting Mode Switching (but, Through-Beam has only in the receiver)
Operation Indicator

Operation Indicator (Red LED), Stability Indicator (Green LED)
(but, the transmitter (Red LED) of Through-Beam is Power Indicator)
Protection Circuit

Built-in Protection Circuit from reversed power supply
connection, Output Short-Circuit Overcurrent circuit protection
Operating Ambient temp.Operating: -10 ~ 60 °C, Storage: -25 ~ 70 °C (without freezing)
Operating Ambient Humidity35 - 85 % R.H.
Operating Ambient IlluminationSunlight: below 11000 Lux, Incandescent lamp: below 3000 Lux
Case ProtectionIP67 (IEC Standard)
Vibration Resistance10 ~ 50 Hz (cycle for 1 minute), double amplitude: 1.5 mm, in each direction X•Y•Z for 2 hours
Shock Resistance500 m/s² (approx. 50 G), X•Y•Z for 3 times
Dielectric Strength500 V AC (at 50/60 Hz for 1 minute)
Insulation ResistanceAbove 20 MΩ (500 V DC)
Connection MethodCable Length: 2 m (Ø 4 mm, 4P) but, the length of the transmitter of Through-Beam: 2 m (Ø 4 mm, 3P)
Acce ssoriesIndividual-Reflector (Mirror 50 x 50)-
Common

Screw driver for adjusting sensitivity, nuts, washers
(But, the nuts of Plastic Type are injection molding products. (except washers))

Bình luận

HẾT HẠN

0905 261 889
Mã số : 9055091
Địa điểm : Hà Nội
Hình thức : Cần bán
Tình trạng : Hàng mới
Hết hạn : 09/12/2020
Loại tin :

Thường

Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!

Gợi ý cho bạn