Braun Converter Vietnam Bộ Chuyển Đổi Tín Hiệu Tương Tự Braun Vietnam

Application Characteristics

• Widely used at drives and any other process to convert to an analog signal, for process controlling, speed display, recording, data handling

• Input to frequency signals 0 ... 100 kHz with programmable high and low end of range

• Responding to all type of sensors and transmitters

• Easy installation and operation

• Precise digital calibration to the application data

• Analog output 20 ma / 10 volts

Specific Features

• Alternative input paths for high level signal sources and with high sensitivity for low level signals

• 5 digit scaling factor for the quantity under measurement

• 3 digit programmable input frequency divider to compensate signal sequence irregularities

• Measuring principle combining programmable fast response and averaging within wide limits

• Square wave input repeating output

• Isolated analog signal output

• 5 digit display reading the variable in programmed terms (8 mm LCD).

Analog Output

Isolated from input and power supply. Current 0/4-20 ma into max load 750 ohms. Alternatively by terminal jumper 0/2-10 volts with max load 3 ma. Conversion span and live zero programmable.
Resolution 12 bit (1:4096). Accuracy 0.1 %. 
Long term stability 0.25% for 5000 hrs. 
Temperature stability 0,02%/°C within 0-40 °C.

Ambient Temperature in operation
Standard 0 ..+ 50 °C.

Increased range (suffix M to model No) -25 °C ...+ 65 °C.
No condensation.

Design
Snap-on-track enclosure for 35 mm DIN rail. 70 mm long, width 75 mm, height 110 mm. 
Display (8 mm LCD) and programming keys (lowered) on top.
Protection grade enclosure IP 40,terminals IP 20.
Weight approx. 250 grams.

Special design for outdoor mounting in IP65 (NEMA 4) enclosure. Suffix -G to model No.

Power supply
on option: