M2000 | M20 | M20Bp | M4500A | M4500Abp| M4800A | M4900A| Fairchild |Pneumatic Volume Boosters| Bộ Tăng Áp

Liên hệ

D5 Miếu Nổi, Đinh Tiên Hoàng, P.3, Q.bình Thạnh

Công ty PITESCO chuyên phân phối các thiết bị công nghiệp tự động hóa như điện công nghiệp, cảm biến, biến tần; PLC,...của các hãng Đức, Ý, Nhật,...

Xin vui lòng liên hệ với chúng tôi để được tư vấn kỹ thuật và hỗ trợ giá tốt.

Ms Xuân

Sales Dept

Cellphone: 0912.979.551

email: xuan.pitesco@gmail.com

Pneumatic Volume Boosters

Pneumatic volume boosters feature high flow capacity and fast response. A wide range of signal to output pressure ratios, pipe sizes and options are available in Fairchild''s pilot operated regulator booster products with a Cv of 1 up to a Cv of 18, with flow capacities of 45 SCFM, 76.5 m3/hr up to 1500 SCFM, 2550 m3/hr.

Model 2000 - 40 SCFM [68 m3/Hr] Forward/Exhaust Flow No Bleed Volume Booster (M2000)

The Model 2000 Pneumatic Volume Booster converts a low flow signal to a high flow output. It is ideally suited for a variety of applications including the operation of air systems that require rapid valve or cylinder action. As a pilot operated regulator design, the M2000 handles up to 250 psig, [17.0 BAR], (1700 kPa) supply pressure. The Fairchild Model 2000 provides a flow capacity of 40 SCFM (68 m3/HR), which results in a Cv factor of just less than 1.0 in forward flow mode.

Model 20 - 45 SCFM [76.5 m3/Hr] Forward/Exhaust Flow Volume Boosters (M20)

The Model 20 Volume Booster is a smaller pneumatic device capable of high flow and exhaust capacity. This device uses a force balance system to control the movement of the supply and exhaust valves. As a pilot operated regulator design, the M20 handles up to 150 psig, [10.0 BAR], (1000 kPa) supply pressure and has ten available ratios to cover a wide range of applications. The Fairchild Model 20 Booster provides a flow capacity of 45 SCFM (76.5 m3/HR), which equates to a Cv factor of approximately 1.0 in both forward and exhaust modes.

M20 Back Pressure Pneumatic Booster (M20BP)

Fairchild''s M20BP is a smaller Back Pressure Pneumatic Booster designed for automation or remote controlling of the back pressure or relief operation typically found in tank systems and other pressurized systems. In its pilot operated design, the M20BP will operate from a signal pressure of up to 150 psig [10.0 BAR] (1000kPa) and handles up 250 psig, [17.0 BAR], (1700 kPa) system pressure. The Fairchild Model 20BP Back Pressure Booster provides a flow capacity of 45 SCFM (76.5 m3/HR), which equates to a Cv factor of approximately 1.0.

Model 4500 - 150 SCFM [255 m3/Hr] Forward/Exhaust High Flow No Bleed Volume Boosters (M4500A)

Fairchild''s Model 4500 Pneumatic Volume Booster is popular due to its rugged design and high flow capacity in an economical package. In its pilot operated regulator design, the M4500 handles up 250 psig, [17.0 BAR], (1700 kPa) supply pressure and has five available signal to output ratios to meet most control element requirements. The Fairchild Model 4500 Booster provides a flow capacity of 150 SCFM (255 m3/HR), which equates to a Cv factor of approximately 3.0 in both forward and exhaust modes.

M4500A Back Pressure Pneumatic Booster (M4500ABP)

Fairchild’s M4500ABP is a High Flow Back Pressure Booster designed for automation or remote controlling of the back pressure or relief operation typically found in tank systems and other pressurized systems. In its pilot operated design, the M4500ABP will operate from a signal pressure of up to 150 psig [10.0 BAR] (1000kPa) and handles up 250 psig, [17.0 BAR], (1700 kPa) system pressure. The Fairchild Model 4500ABP Back Pressure Booster provides a flow capacity of 150 SCFM (255 m3/HR), which equates to a Cv factor of approximately 3.0.

Model 4800A - 500 SCFM [850 m3/HR] Forward/Exhaust High Flow No Bleed Volume Booster with Bypass Valve (M4800A)

Fairchild’s M4800A is a High Flow Pneumatic Volume Booster specifically designed for Valve and valve actuation systems. With its Cv of 9 in both forward and exhaust modes, this pilot operated booster provides fast response and accurate control for valve actuation. In addition, the M4800A has an integral bypass valve, for optimum tuning and adjustment, even while in operation, to obtain maximum performance on opening and closing times with minimal overshoot or oscillation. In its pilot operated regulator design, the M4800A handles up 250 psig, [17.0 BAR], (1700 kPa) supply pressure and delivers an output pressure up to 150 psig [10.0 BAR] (1000kPa). The Fairchild Model 4800A Booster provides a flow capacity of 500 SCFM (850 m3/HR), which equates to a Cv factor of approximately 9 in both forward and exhaust modes.

Model 4900A - 500 SCFM [850 m3/HR] Forward/Exhaust High Flow No Bleed Volume Booster (M4900A)

Fairchild’s M4900A is a High Flow Pneumatic Volume Booster designed for high precision applications. With its Cv of 9 in both forward and exhaust modes, this pilot operated booster provides fast response, very low deadband and high precision control. In its pilot operated regulator design, the M4900A handles up 250 psig, [17.0 BAR], (1700 kPa) supply pressure and delivers an output pressure up to 150 psig [10.0 BAR] (1000kPa). The Fairchild Model 4900A Booster provides a flow capacity of 500 SCFM (850 m3/HR), which equates to a Cv factor of approximately 9 in both forward and exhaust modes.

Model 200 - 1800 SCFM [3058 m3/Hr] Forward Ultra High Flow Volume Booster (M200)

The Model 200 Pneumatic Volume Booster reproduces a pneumatic signal in a 1:1 ratio. It is ideally suited for systems that require input isolation or increased forward flow capacity. This device uses a force balance system to control the movement of the supply and exhaust valves. As a pilot operated regulator design, the Fairchild Model 200 handles up to 250 psig, [17.0 BAR], (1700 kPa) supply pressure and provides a flow Ultra high flow capacity of 1800 SCFM (3058 m3/HR), which equates to a Cv factor of approximately 18 in forward flow mode.

Model 200XLR - 1800 SCFM [3058 m3/Hr] Forward/Exhaust Ultra High Flow Volume Boosters (M200XLR)

Based on the Model 200 valve body, the Model 200XLR Volume Booster couples two identical units to obtain ultra high flow capacity in both forward and exhaust modes. As a pilot operated regulator design, the Fairchild Model 200XLR handles up to 250 psig, [17.0 BAR], (1700 kPa) supply pressure and provides a flow Ultra high flow capacity of 1800 SCFM (3058 m3/HR), which equates to a Cv factor of approximately 18 in both forward and exhaust flow modes.

Từ khóa gợi ý: Bộ Tăng Áp Pneumatic Fairchild Semiconductor Chiết Áp Volume Bộ Tăng Áp Vba Bộ Tăng Áp Suất Tăng Áp Pneumatic Actuators Pneumatic Cpb Pneumatic Actuator Pneumatic Actuators Pneumatic Drill Pneumatic Tpc Chicago Pneumatic Pneumatic Van Bộ Tăng Áp Rửa Xe Bộ Tưới Cây Tăng Áp Bộ Tăng Áp Bst 4 Bộ Vòi Sen Tăng Áp Bộ Sen Tắm Tăng Áp

Bình luận

Ms Xuân

HẾT HẠN

Mã số :	9274357
Địa điểm :	Hồ Chí Minh
Hình thức :	Cần bán
Tình trạng :	Hàng mới
Hết hạn :	31/12/2020
Loại tin :	Thường