Thiết Bị Đo Lường Máy Đo Cmm

Liên hệ

Số Tt12 – C24, Kđt Văn Quán, Hà Đông, Hà Nội, Việt Nam

CÔNG TY CỔ PHẦN THIẾT BỊ ĐO LƯỜNG 3D VINA

 

MÔ TẢ SẢN PHẨM


GENERAL FEATURES

The KRONOS series is also available in NT version, equipped with the innovative Silicon Carbide spindle for even higher metrological performance.



FEATURES AND BENEFITS



  • Aluminum alloy moving carriage structure with integrated granite top
  • Generously sized Z spindle made of light aluminum alloy or Silicon Carbide (NT)
  • Mixed rack-and-pinion and hysteresis-free clutch drive system for smooth and repeatable movement
  • Measurement system with high-resolution linear transducers (0.1 µm)
  • Multi-sensor automatic temperature compensation system, with part temperature probe

ENVIRONMENT



  • Temperature range for metrological specifications:
    – T1:
    Ambient temperature: 18 ÷ 22 °C
    Maximum hourly gradient: 1.0 °C/h
    Maximum daily gradient: 2.0 °C/24h
    Maximum gradient in volume: 0.5 °C/m
    – T2:
    Room temperature: 16 ÷ 26 °C
    Maximum hourly gradient: 1.0 °C/h
    Maximum daily gradient: 5.0 °C/24h
    Maximum gradient in volume: 1.0 °C/m
  • Operating Temperature: 15 to 35 °C
  • Relative humidity for operation: 40 to 80 % (non-condensing)
  • Allowable vibration: (Peak/peak acceleration)
    30 mm/s2between 1 and 10 Hz
    15 mm/s2between 10 and 20 Hz
    50 mm/s2between 20 and 100 Hz

FEEDS



  • Pressure: 6 Bar -79PSI
  • Air consumption: 160Nl/min
  • Power supply230 V ± 10%; 50 Hz ± 2% single phase
  • Absorption: 10A 1600W

MEASURING HEADS AND PROBES



  • Manual Heads: MIH, MH20, MH20i
  • Indexable Motorized Heads: PH10T, PH10M, PH10MQ
  • Point-to-point touchers: TP2, TP20, TP200
  • Analog keyers: SP25 scanning analog keyer
  • Laser sensors: Metris LC/XC series (including qualification sphere)
  • Probe and tip changing systems: Automatic changing stations

PERFORMANCE


Each COORD3 CMM is tested according to UNI EN ISO 10360-2 standards.

 

KRONOS NT 20.15

The indicated performance is valid under the following conditions:
– PH10M/PH10MQ/PH20/TP20/TP200: Ø4mm stylus length 10mm
– PH10MQ/SP25: SM1, stylus Ø 5mm x 50mm
– L= measurement length in mm
– Ambient temperature conditions:
T1 : 18÷22°C; Max gradients: 1.0 °C/h – 2.0 °C/24h – 0.5 °C/m
T2: 16÷26°C; Gradients max: 1.0 °C/h – 5.0 °C/24h – 1.0 °C/m

[1] Maximum Permissible Error on length measurements according to ISO 10360-2
[2] Maximum Permissible Error on Point Grip according to ISO 10360-2
[3] Maximum Permissible Error of Point Grip on scanning according to ISO 10360-4 for SP25M/SP80 probes.

 

KRONOS NT 13.10 – 15.13

The indicated performance is valid under the following conditions:
– PH10M/PH10MQ/PH20/TP20/TP200: Ø4mm stylus length 10mm
– PH10MQ/SP25: SM1, stylus Ø 5mm x 50mm
– L= measurement length in mm
– Ambient temperature conditions:
T1 : 18÷22°C; Max gradients: 1.0 °C/h – 2.0 °C/24h – 0.5 °C/m
T2: 16÷26°C; Gradients max: 1.0 °C/h – 5.0 °C/24h – 1.0 °C/m

[1] Maximum Permissible Error on length measurements according to ISO 10360-2
[2] Maximum Permissible Error on Point Grip according to ISO 10360-2
[3] Maximum Permissible Error of Point Grip on scanning according to ISO 10360-4 for SP25M/SP80 probes.

OPTIONS



  • Passive Antivibration System
  • Active vibration damping system (AVM)
  • Multi-wire wiring
  • Manual/automatic pallet loading/unloading system
  • PC and Printer
  • Training at Coord3 center or agents
  • Installation by Coord3 staff or agents
  • Models and dimensions:
    COORD3 KRONOS CMMs are available with the following measuring strokes (Y.Z mm):
    13.10/15.13/20.15














 

Hãy gọi ngay cho 3D Vina khi cần dịch vụ, thiết bị…

·        Địa chỉ: Số TT12 – C24, KĐT Văn Quán, Hà Đông, Hà Nội, Việt Nam

·        Hotline/ Zalo hỗ trợ: 0978.190.642

·        Email: 3dvina.hieuchuan3d@gmail.com

Bình luận

HẾT HẠN

0978 190 642
Mã số : 17067508
Địa điểm : Hà Nội
Hình thức : Cần bán
Tình trạng : Hàng mới
Hết hạn : 20/04/2023
Loại tin :

Thường

Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!

Gợi ý cho bạn