Cảm Biến Lực Căng-Tension Control-Fms Vietnam
Liên hệ
Số 27 Trung Kính, Cầu Giấy, Hà Nội
ANS Việt Nam là công ty XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp.
Ms. Yen (Sales Dept.)
email: yenhn.ans@ansvietnam.com
Online contact=====================================
YM: yen.nguyen_ans
Skype: yen.nguyen_ans
Force Measuring Sensors (Load Cells) for Web Tension Control
All FMS force measuring sensors are characterised by its highest overload protection and its designated accuracy. It is achieved by a mechanical hardstop and four foil-type strain gauges in a full wheatstone bridge configuration. The red point on the outside of the sensor indicates the positive measuring direction.
Most FMS force measuring sensors are also available as vacuum sensors.
LMGZ Force Measuring Bearing
The LMGZ series tension sensors offer the highest accuracy, reliability, and durability in the industry. The ultra flat sensor can be used in the most stringent space conditions.
| Features | Advantages |
| 20 times overload protection | No recalibration required |
| Accuracy class 0.3% | Highest precision |
| 50:1 force measuring range | Wide measuring capability at high resolution |
| Nominal forces from 33 to 25000 N | Sizes available for every application |
| Stainless steel construction | Corrosion resistant |
A203 Series Force Measuring Sensors
The A203-Series Force Measuring Sensors is for use in live shaft roller applications. The straightforward mounting concept of the A 203 sensors saves time and money. The installation to the machine side frame is simply accomplished with only using a single mounting screw.
| Features | Advantages |
| Easy installation via a central screw | Adaptable in machines with difficult mounting conditions |
| Accuracy Class 0.5% | Highest accuracy even at low loads |
| Nominal Forces 50, 125, 250, 500 and 1000 N | Covers low and medium application range |
| Sensor Body of High Quality Aluminium | Sturdy, durable product with long term stability (over load protection 1x Fn). |
C203 Force Measuring Sensor
The dual flexion beam sensors of the C203 series set new benchmarks with regards to precision, reliability and economic efficiency.
| Features | Advantages |
| 10 times overload protection | No re-calibration required |
| 20:1 force measuring range | Wide measuring capability at high resolution |
| Nominal forces 50, 125, 250, 500 and 1000 N | Covers a wide application range |
| Stainless steel sensor, Aluminum Cover | Corrosion resistant, ultra durable |
CA203 Force Measuring Sensor
The CA203 series is made for dead shaft applications. FMS dual flexion beam technology sensors set new benchmarks with regards to precision, reliability and economic efficiency.
| Features | Advantages |
| 10 times overload protection | No re-calibration required |
| 20:1 force measuring range | Accuracy class 0.5% |
| Nominal forces 50, 125, 250, 500, 1000, 1500 N | Covers a wide application range |
| Stainless steel sensor, Aluminum Cover | Corrosion resistant, ultra durable |
F202 Force Measuring Sensor
The F202 Series Force Measuring Sensor is for use in live shaft roller applications where limited space is available. Their slim design provides a new option for accurate web tension measurement on machines where wider sensor designs simply did not fit. The sensor is easily mounted to the machine side frame with two shoulder bolts.
| Features | Advantages |
| Ultra Slim Design | Adaptable in machines with difficult space conditions |
| 30:1 Force Measuring Range | Accurate measurements also at low loads |
| Accuracy Class 0.3% | Highly linear measuring characteristic |
| Nominal Forces 50, 125, 250, 500 N | Covers a wide application range |
| Stainless Steel Sensor, Aluminium Cover | Corrosion resistant, ultra durable |
FA202 Force Measuring Sensor with Dead Shaft Adapter
The FA202 Series Force Measuring Sensor is for use in dead shaft roller applications where limited space is available. The slim sensor design provides a new option for accurate web tension measurement on machines where wider sensor designs simply will not fit. The range of adapters covers the most popular shaft diameters.
| Features | Advantages |
| Ultra Slim Design | Adaptable in machines with difficult space conditions |
| 30:1 Force Measuring Range | Accurate measurements also at low loads |
| Accuracy Class 0.3% | Highly linear measuring characteristic |
| Nominal Forces 50, 125, 250, 500 N | Covers a wide application range |
| Stainless Steel Sensor, Aluminium Cover | Corrosion resistant, ultra durable |
LMGZ.D Double Range Force Measuring Bearing
The LMGZ.D double range force measuring bearing sensors offer the highest accuracy, reliability, and durability in the industry. Especially when processing widest kinds and widths of materials.
| Features | Advantages |
| Measurable tension range 1:200 | Widest measuring range available at high resolution |
| Overload protection 10 times the rated high the nominal force | Recalibration is not required |
| Nominal forces from 33 - 6000 N | Sizes available for every application |
| Stainless steel sensor | Corrosion resistant |
CZ205 Force Measuring Journal
The force measuring journals of the CZ 205 Series undertake the tension measurement in all kinds of continuous material processing applications.
| Features | Advantages |
| 10 times overload protection | No recalibration required |
| 20 : 1 force measuring range | Wide measuring range at high resolution |
| Nominal forces 50, 125, 250, 500, 1000, 1500 N | Covers a wide application range |
| Stainless steel sensor, aluminium cover | Corrosion resistant, ultra durable |
UMGZ Force Measuring Bearing Block
The UMGZ force measuring blocks are ruggedly constructed, accurate and very reliable. They are used in normal and dry ambient conditions.
| Features | Advantages |
| Overload protection, 10-times nominal measuring force | No recalibration required |
| Nominal forces of 0,5-100 kN | Nominal forces suitable for all uses |
| Stainless steel force sensors | Permanently corrosion-resistant |
UMGZ.P Force Measuring Block
UMGZ.P force measuring blocks are a first-rate substitute for the discontinued Philips products PR 9951/52. They are with regards to the outline dimensions and mounting holes 1-to-1 compatible with the former Philips blocks. UMGZ.P blocks feature all typical characteristics of FMS products like simplicity, quality and enduring precision. They are the ideal sensors for a retrofit.
| Features | Advantages |
| Drop-in replacement for Philips PR 9951/52 measuring blocks | Easy exchange without machine frame modifications |
| Overload protection 10 times nominal force | No recalibration required |
| Accuracy class 0.3% | Highly linear measuring characteristic |
| Nominal force ratings from 1 kN (225 lbf) to 10 kN (2248 lbf) | Forces suitable for many applications |
| Stainless steel force sensor | Corrosion resistant, ultra durable |
SMGZ Force Measuring Bearing Block
SMGZ force sensors are used in difficult ambient conditions, e.g. hydrocarbon media like, rolling oils or in high temperatures environments. They can be used in virtually any metal strip process.
| Features | Advantages |
| Overload protection, 10-times nominal measuring force | No recalibration required |
| Nominal forces of 2-100 kN | Nominal forces suitable for all uses |
| Stainless steel force sensors | Permanently corrosion-resistant |
| Protection class IP67 | High level of operational safety |
PMGZ Force Measuring Bearing Block
These force sensors are perfect for difficult ambient conditions, e.g. cooling water, wet paperpulp, high temperatures, humidity, acids and bases. They can be used in virtually any wet environment.
| Features | Advantages |
| Overload protection, 10-times nominal measuring force | No recalibration required |
| Nominal forces of 2-100 kN | Nominal forces suitable for all uses |
| Stainless steel force sensors | Permanently corrosion-resistant |
| High temoerature up to 120°C | Covers high-temperature applications |
IMGZ Series Force Measuring Roller
The measuring sensors are integrated in the roller and measure the forces which are acting on the roller in an accuratly and effective manner.
| Features | Advantages |
| Sensor integrated in roller with only one electrical connection | Easy mounting and connection |
| 10 times overload protection | Recalibration is not required |
| Nominal forces from 200 - 3000 N | Sizes available for every application |
| 50:1 force measuring range | Wide measuring capability |
| Stainless steel sensor | Corrosion resistant, ultra-durable |
RMGZ900 Force Measuring Roller
The RMGZ900 series force measuring rollers are designed as self contained cantilever mount sensors that minimise machine space requirements in continuous material processing applications.
| Features | Advantages |
| Roller length up to 900mm | Wide variety of sizes for the middle material range |
| 10 times overload protection | Recalibration is not required |
| 20:1 force measuring range | Wide measuring capability |
| Nominal forces from 50 - 1000 N | Large sensor choice for the me |
▶Thông tin chung
| Hãng sản xuất | FMS |
| Xuất xứ | Thụy Sỹ |
| Mã số : | 11615199 |
| Địa điểm : | Hà Nội |
| Hình thức : | Cần bán |
| Tình trạng : | Hàng mới |
| Hết hạn : | 16/04/2025 |
| Loại tin : | Thường |
Gợi ý cho bạn
Bình luận