Braun-Tacho Displays, Setpoint Alarms, Converters To Analog Or To Data Output

• Range from zero speed up to more than 100 kHz.
• Precise and fast tracking response by pulse interval measurement with automatic floating period.  Can be extended over a programmable minimum time for  the tracking speed and averaging, as appropriate to the application.
• Easily  programmed at the unit itself, for exact adaptation to the application: number of teeth, gear ratio, decimal point in readings, span of an analog output, alarm response characteristics, starter condition.
• Power supply by AC and DC, voltage range 18 …40 V  or 85 …265 V.
• Design option, snap-on-track enclosure (D), panel mount (C), or 19-inch rack module (E).

• Analog output 20 mA/10 volts,   programmable live zero, -alarms with programmable hysteresis band and position, - display  by LCD or bright red LED, 
  - signal input with sensor monitor or with additional path     for low level sensors, 
  - adjustable input pulse divider to balance mechanical target irregularities. 
  - Additional speed measuring channel to read ratio or difference (slip, draw, synchronism).
• Data interface output of measurements.

   

Series No.

design

see figure

display

analog

output

setpoint

alarms

sensor

monitor

additional low

level input

input pulse

divider

additional

measuring channel

RS232

option

Download

Series No.

Application

design

(see figure)

analogue

output

setpoint

alarms

input to

sensor series

RS232

option

Download