Can To Fiber Converter, Icp Das I-2532

Liên hệ

847 Huyen Ky, Phu Lam, Ha Dong, Ha Noi, Viet Nam


Kính gửi quý khách hàng

Công ty chúng tôi chuyên cung cấp các thiết bị và dịch vụ kĩ thuật, lắp đặt, Lĩnh vực tích hợp hệ thống tự động hóa SCADA/DCS, quan trắc công trình, v.v.

Chúng tôi xin giới thiệu tới quý khách  sản phẩm CAN to Fiber Converter, ICP DAS I-2532.

CAN to Fiber Converter with ST Connector. Supports operating temperatures from -25°C to 75°C

 Features



Fiber optic transmission medium is a good material to protect data transmission from EMI/RFI interference. It has been used in harsh environments extensively. CAN bus is famous in industrial applications. In order to solve the problem between using different transmission mediums, I-2532 is specially designed for converting the electrical CAN bus signal to fiber optic cables.

The fiber length between two I-2532s can be up to 1.4km (4593ft). It is mainly decided by the cable attenuation of fiber and the CAN bus baud. I-2532 is the economical solution for applications which require protecting the data transmission from electrical exposure, surges, lightning or chemical corrosion.



  • Compatible with CAN specifications 2.0A and 2.0B

  • Fully compatible with the ISO 11898-2 standards

  • Supports baud rates up to 500 Kbps

  • Jumper for 120Ω terminator resistor of CAN bus

  • Fiber Port: ST (Multi-mode)

  • Wave Length: 850 nm

  • Auto-baud detection

  • up to 100 nodes on CAN port

  • Removable terminal block

  • Mount easily on DIN-rail

  • Applications

    • Control System

    • Building Automation

    • Factory Automation

    • Distributed data acquisition




Specifications & Additional Information



I-2532

CAN Port Channels

2

CAN Connector

8-pin removable screw terminal × 1

Fiber Connector

ST (Multi-mode) Fiber Port × 2

Wave Length

850 nm

Fiber Cable

62.5/125 μm

Baud Rate

10K ~ 500Kbps

Terminator Resistor

Selectable 120Ω terminator resistor by jumper

Support Protocol

CAN 2.0A/2.0B

Propagation Delay

125ns max (125ns delay shortens bus line length by ~25m)

Power Requirement

Unregulated +10VDC ~ +30 VDC Power reverse protection,Over-Voltage brown-out protection

Power Consumption

0.5W max

LED

Power LED × 1, Transmit LED × 1, Receive LED × 1

Operating Temp.

-25°C to 75°C

Storage Temp.

-40°C to 80°C

Humidity

5~95% non-condensing

Dimensions

32.30mm × 99.00mm × 77.50mm (H x W x D)

 

Để biết thêm thông tin về sản phẩm cũng như dịch vụ lắp đặt, tích hợp hệ thống. Hãy liên hệ với chúng tôi hoặc truy cập vào website : www.mctt.com.vn

Rất mong được phục vụ quý khách.

Thanks and Best Regards!

_____________________

Nguyen Van Hung

Measurement and Control Equipment Co.,Ltd

847 Huyen Ky, Phu Lam, Ha Dong, Ha Noi, Viet Nam

Mobile: (+84) 904251826

Tel : (+84) 4 85894254

Yahoo: nvhung.mctt

Skype: nvhung.mctt

Email: nvhung@mctt.com.vn

Website: http://www.mctt.com.vn



Thông tin chung

Manufacturer ICP DAS
Type CAN to Fiber Converter
Connectors Terminal, DB9

Bình luận

0904 251 826
Mã số : 9146999
Địa điểm : Hà Nội
Hình thức : Cần bán
Tình trạng : Hàng mới
Hết hạn : 22/12/2020
Loại tin :

Thường

Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!

Gợi ý cho bạn