Thiết Bị Gá Lắp Và Cấp Nguồn Cho Bộ Mã Hóa Quang Điện 4U-2A (Wintop)

Liên hệ

62 Bà Triệu - Hoàn Kiếm - Hà Nội



RACK-MOUNT CHASSIS FOR VIDEO DIGITAL OPTICAL TRANSCEIVER CARD


Overview:

The WT-4U Chassis can accommodate a combination of up to 18pieces 1-4 channels video modules or 9 pieces 5-8 channels video modules. The chassis employs a 110/220V AC Switch Mode Power Supply (SMPS) design, which reduces the possibility of a single module failure causing a shutdown or a major failure of other modules within the chassis. The high reliability and stability ensures that if one module shuts down, the operation of the other modules remains unimpaired. 0ne or two air-cooling fans are installed inside to further strengthen the superior performance of the system and eliminate the necessity for periodic maintenance. Status information can be read through the LED indicators on the installed modules. All of the modules installed in the chassis are hot pluggable, which makes it unnecessary to power-down the chassis when replacing modules.

 Technical Specification:


Available Module Slots

18

Video converters module adapted

1-16 video + options

Power in

AC 100 V~260 V

Power out

DC5V 20A

Dimensions

L482.6xW313.5xH177(mm) ;19 inches  4U

Shipping Weight

7.4Kg

ENVIRONMENTAL

Construction

Aluminum

MTBF

> 100,000 hours

Operating Temp

-30°C to +70°C

Storage Temp

-40°C to +85°C

Relative Humidity

0% to 95% (non-condensing)

PACKING  LIST

WT-4U      

1PC 19’’ 4U chassis 

Power line   

1 PC (For single power supply option)

2 PCs (For dual power supply option)

 Installation:


  1. When you unpack this product package ,please check the devices with packing list.
  2. Install the 18-slots chassis into a standard 19” cabinet and fix it.
  3. Insert the video converter module to the guide rails of the slot .Make sure the power plug of video converter module is inserted in power port of the chassis .When the converter module is fully and firmly fit the chassis ,fasten the screws .Follow the above steps ,install all necessary converter modules in the chassis ,then block up any slots not for use temporarily.
  4. If the chassis is with dual power supply ,please turn on both two power supply ,and they will work together. This will extends the life cycle of the power supply, and can make sure the chassis work normally in case one of them broken down.

 Ordering Information:


Model

Description

WT-4U-1A

4U Rack-mount Chassis  1AC Power supply

WT-4U-2A

4U Rack-mount Chassis  2AC Power supply

Thông tin liên hệ:

Công ty TNHH Thương mại và Dịch vụ Viễn thông Văn Yến Vương.

Địa chỉ:           62 Bà Triệu, Hàng Bài, Hoàn Kiếm, Hà Nội, Việt Nam

Điện thoại:      +84 39449539

Fax:                +84 39454182

Website:          www.vyv.com.vn

Email:             contact@vyv.com.vn




Bình luận

HẾT HẠN

0902 288 265
Mã số : 4036052
Địa điểm : Hà Nội
Hình thức : Cần bán
Tình trạng : Hàng mới
Hết hạn : 31/12/2020
Loại tin :

Thường

Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!

Gợi ý cho bạn