Bộ Chia Tín Hiệu Drago Dn 21000
2,5 triệu
37 Đường 16, P. Bình Trưng Đông, Q.2
CTY ÂU MỸ LÀ ĐẠI LÝ HÃNG DRAGO TẠI VIỆT NAM.
BỘ CHIA TÍN HIỆU DN21000 HÃNG DRAGO
CHIA 1 TÍN HIỆU 4...20Ma HOẶC 0-10V THÀNH 2 TÍN HIỆU MÀ KHÔNG LAM SUY GIẢ TÍN HIỆU
echnical Data
Input
| Input signal | 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V calibrated switchable | |
| Input resistance | Current input Voltage input | ≤ 35 Ohm ≥ 100 kOhm |
| Overload | Current input Voltage input | ≤ 50 mA ≤ 30 V |
| Transmitter supply voltage | 16 V (open circuit voltage < 22 V) | |
| Max. supply current | < 35 mA | |
Output I + II
| Output signal | 0 to 20 mA, 4 to 20 mA, 0 to 5 V, 0 to 10 V, 1 to 5 V, 2 to 10 V calibrated switchable | |
| Load | Current output: ≤ 6 V (300 Ohm at 20 mA) | Voltage output: ≤ 5 mA (2 kOhm at 10 V) |
| Offset | Current output: < 20 µA | Voltage output: < 10 mV |
| Linear transmission range | -1 to +110 % | |
| Ripple | < 10 mVeff | |
General Data
| Transmission error | < 0.1 % full scale | |
| Temperature coefficient 1) | < 100 ppm/K | |
| Cut-off frequency | 5 kHz | |
| Response time (T10-90) | 100 µs | |
| Test voltage | 3 kV, 50 Hz, 1 min, Input against Output I against Output II against power supply | |
| Working voltage 2) (Basic Insulation) | Up to 600 V AC/DC for overvoltage category II and pollution degree 2 acc. to EN 61010-1 between all circuits. | |
| Protection against electrical shock | Protective separation according to EN 61140 by reinforced insulation in accordance with EN 61010-1 up to 300 V AC/DC for overvoltage category II and pollution degree 2 between all circuits. | |
| Ambient temperature | Operation Transport and storage | –25 °C to +70 °C (-13 to +158 °F) –40 °C to +85 °C (-40 to +185 °F) |
| Power supply | 24 V DC 16.8 V to 31.2 V DC, approx. 1.3 W | |
| EMC 3) | EN 61326-1 | |
| Construction | 6.2 mm housing, protection class: IP 20 | |
| Weight | Approx. 70 g | |
- Average TC based on the final value in specified operating temperature range
- As far as relevant the standards and rules mentioned above are considered by development and production of our devices. In addition relevant assembly rules are to be considered by installation of our devices in other equipments. For applications with high working voltages, take measures to prevent accidental contact and make sure that there is sufficient distance or insulation between adjacent situated devices.
- Minor deviations possible during interference
Terminal assignments
| 1 | + | Input -I +U +Loop |
| 2 | - | Input +I -U -Loop |
| 3 | + | Output II |
| 4 | - | Output II |
| 5 | + | Output I |
| 6 | - | Output I |
| 7 | + | Power supply (connected to In-Rail-Bus) |
| 8 | - | Power supply (connected to In-Rail-Bus) |
Connection
Captive plus-minus clamp screws
Wire cross-section max. 2.5 mm² / AWG 14
Stripped length 6 to 8 mm / 0.28 in
Screw terminal torque 0.8 Nm / 7 lbf in
Optional power connection via In-Rail-Bus (see accessories)
Liên hệ để được tư vấn:
Long Tran
Mob.: +84 909 006 435
+84 909 006 435
Email.: long.tran@aumyco.com
AU MY technology Service Trading Company limited
Add.: 93/36 Street 02, Tam Binh Ward, Thu Duc District, Ho Chi Minh city, Vietnam
Tel.: +84 3 816 2902 Fax: +84 3 816 2902
Web.: www.aumyco.com Email.: info@aumyco.com
HẾT HẠN
| Mã số : | 11113522 |
| Địa điểm : | Hồ Chí Minh |
| Hình thức : | Cần bán |
| Tình trạng : | Hàng mới |
| Hết hạn : | 15/12/2020 |
| Loại tin : | Thường |
Gợi ý cho bạn
Bình luận