Mô tả sản phẩm: Bộ thu thập số liệu ICP DAS I-7016P
Introduce I-7000 Modules
ICP DAS 7000 series distributed I/O modules offer the most cutting edge data acquisition capabilities for your industrial control needs. The ICP DAS I-7000 distributed I/O modules are available in a bevy of Digital and Analog configurations, which are communicable via RS-485, as well as capable of interfacing with ICP DAS's own proprietary DCON software interface. The I-7000 series are the ultimate selection in Remote I/O Data Acquisition Modules.
With these products, you can use the serial port on your laptop or desktop PC to connect to voltage inputs, thermocouples, strain gauges, rtds or any analog or digital sensors. The I-7000 Modules have low power consumption and require 10 to 30 VDC. They come with free DCON Utility configuration software for setting them up and they also come with Free EZ Data Logger software for PC based data logging. The I-7000 modules are perfect for small or large systems.
Features I-7016P
I-7016 is a cost-effective solution for a wide range of valuable industrial control signals and systems. The DCON utility can help users to configure and test I-7016P modules. Plenty of library functions and demo programs are provided to let users develop programs easily under Windows, Linux and DOS operating systems. Users may mount the modules on a DIN rail, panel or wall. Modules have a screw-terminal block to connect to the signals. I-7016P comes with FREE EZ Data Logger Software.
Specifications
Analog Input
- Channels: 2
- Analog Input type : mV, V, mA
- Sampling Rate:
- 10 Samples/Second (one-channel mode)
- 2 Samples/Second (two-channel mode)
- Resolution: 16-bit
- Bandwidth: 5.24Hz
- Accuracy: ±0.05% FSR
- Zero Drift: ±0.5μV/ °C
- Span Drift: 25ppm/°C
- CMR @ 50/60Hz: 150dB
- NMR @ 50/60Hz: 100dB
- Input Impedance: 20M Ohms
- Isolation: 3000V rms
Excitation Voltage Output
- Output Channels: 1
- Output Range: 0 to +10V
- Max OUtput Load: 40mA
- Accuracy: ±0.05% of FSR
- Drift: ±50ppm/ °C
- Output Impedance: 12 Ohms
- Isolation: 3000Vdc
- "P" models have voltage feedback to compensate for long excitation wires
Digital Input
- Channels: 1
- Logic Level 0: + 1V max
- Logic Level 1: + 3.5V to 30V
Event Counter
- Max Input Frequency: 50Hz
- Min. Pulse Width:1 mS
Digital Output
- Channels: 4
- Open Collector to 30V
- Output Load: sink 30mA max
- Power Dissipation: 30mW
Display LED
- 4 1/2 digit LED display ( I-7016D)
Communication Interface
- RS-485
Power Supply
- Input Voltage Range : +10 ~ +30Vdc
- Power Consumption :
- 2.4W for I-7016
- 3.0W for I-7016D
Mount
- Din Rail Mount