Lời đầu tiên Công ty Weldtec Mr. Thắng 0987702570 xin gửi lời chúc sức khỏe và thành công đến quý công ty và doanh nghiệp. Với kinh nghiệm trong lĩnh vực cung cấp thiết bị và vật liệu hàn, cắt Weldtec tự hào là doanh nghiệp lớn và uy tín hàng đầu Việt Nam. Các sản phẩm của Weldtec đã được đông đảo người dùng, công ty cơ khí, đóng tầu, dầu khí... sử dụng và đánh giá rất cao về chất lượng cũng như các dịch vụ sau bán hàng. Hiện nay Weldtec là nhà phân phối các sản phẩm hàn, cắt của các hãng nổi tiếng thế giới như:
- LINCOLN( Mỹ ), P anasonic (Nhật), CEA (Ý), Hypertherm (Mỹ)...
Với các dòng sản phẩm chính như:
- Các loại máy hàn: Hàn que AC, DC, TIG, MIG, MAG, hàn điểm điện trở, lazer, hàn tự động, hàn bồn bể, hàn cắt dưới nước, hàn bu lông, hàn đắp.
Xin vui lòng liên hệ Mr. Thắng
Que hàn đặc biệt hệ austenit CrNiMn, có thể dùng cho mọi ứng dụng. Chịu nhiệt tới 850oC
A) TỔNG HỢP MỘT SỐ LOẠI VẬT LIỆU TIÊU BIỂU
CHỦNG LOẠI
Standards : DIN 8573 : E Ni-BG 22
ISO 1701 : E Ni
AWS A5.15 : E Ni-Cl
metals to steel, copper and copper alloys, especially for repair and maintenance.
Welding properties
in all positions and with minimal amperage. The weld deposit and the transition zones are filable.
No undercutting. Ideally suited for the combined welding with the ferronickel type UTP 86 FN (buttering with UTP 8 and filling with UTP 86 FN).
Mechanical properties of the weld metal
Hardness ( HB) : approx. 180
Weld metal analysis in %
C :1,2 Fe: 0,5 Ni: balance
DIN 8573 : E NiFe-1 BG 12
ISO 1071 : E NiFe
AWS A5.15 : E NiFe-Cl
UTP 86 FN is suitable for joining and surfacing of lamellar grey cast iron GG 10 - GG 40, nodular cast iron (spheroidal cast iron) GGG 40 - GGG 70 and malleable cast iron grades GTS 35 -GTS 65 as well as for joining these materials with each other or with steel and cast steel.
Universally applicable for repair, construction and production welding.
Welding properties
UTP 86 FN has excellent buttering characteristics on cast iron. The electrode has a stable arc
and produces a flat seam structure without undercutting. Particularly for fillet welds an optimal
seam structure is achieved (e.g. welding GGG-flanges or sockets to GGG-tubes). Due to the
bimetallic core wire, the current carrying capacity and the deposition rate are excellent. The bead appearance is smooth. The weld deposit is highly crack resistant and easily machinable with cutting tools.
Weld metal analysis in %
C: 1,2 Fe: 45,0 Ni: balance