Kt001140 01140.0-00 Hg 14003.0-00 14003.0-00 Stego Vietnam Stego Viet Nam
Liên hệ
Tp. Hồ Chí Minh
Hãng STEGO
Stego Viet Nam
1. Cảm biến bộ sấy KT001140
2. Điện trở sấy R01: HG 14003.0-00
100% Germany Origin | Stego Vietnam | Article Number: 14003.0-00 |
100% Germany Origin | Stego Vietnam | Article Number: 01140.0-00 |
Anh Nghi Sơn - công ty XNK hàng đầu
ANS tự hào là nhà phân phối hàng đầu Việt Nam chuyên cung cấp các thiết bị tự động hóa, với cam kết chất lượng sản phẩm cao, từ những hãng sản xuất uy tín trên thế giới , với dịch vụ chăm sóc khách hàng tốt nhất.
Với những thương hiệu hàng đầu và uy tín trên khắp thế giới như: Balluff Vietnam, Yaskawa Vietnam, Baumer Vietnam, Agr Vietnam, Bei Encoder Vietnam, Crouzet Vietnam, Kuebler Vietnam, Koganei Vietnam, Celduc Vietnam, Epulse Vietnam, Crydom Vietnam, Raytek Vietnam, Ircon Vietnam, MTS Vietnam, Kimo Vietnam, Pilz Vietnam, Status Vietnam, newall vietnam, sterilair vietnam, Univer Vietnam, Masibus Vietnam, Elap Vietnam, Setra Vietnam, Suntronix Vietnam, WiseVietnam, TMTeck Vietnam, Elco Vietnam....
---
Hãy liên hệ với chúng tôi để được hỗ trợ tốt nhất :
Hot line : 0948927248
Email : giao.ans@ansvietnam.com
---
Stego Viet Nam
1. Cảm biến bộ sấy KT001140
2. Điện trở sấy R01: HG 14003.0-00
100% Germany Origin | Stego Vietnam | Article Number: 14003.0-00 |
100% Germany Origin | Stego Vietnam | Article Number: 01140.0-00 |
SMALL COMPACT THERMOSTAT
KTO 011 / KTS 011
KTO 011: Thermostat (normally closed); contact breaker for regulating heaters. The contact opens when temperature is rising.
KTS 011: Thermostat (normally open); contact maker for regulating of filter fans and heat exchangers or for switching signal devises when temperature limit has been exceeded. The contact closes when temperature is rising.
| Switch temperature difference | 7K (±4K tolerance) |
|---|---|
| Sensor element | thermostatic bimetal |
| Contact type | snap-action contact |
| Service life | > 100,000 cycles |
| Max. switching capacity | 250VAC, 10 (2) A / 120VAC, 15 (2) A DC 30W at 24VDC to 72VDC |
| Max. inrush current | AC 16A for 10 sec. |
| Connection | 2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm² (AWG 14) stranded wire1 1.5mm² (AWG 16) |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Casing | plastic according to UL94 V-0, light grey |
| Dimensions | 60 x 33 x 43mm |
| Weight | approx. 40g |
| Fitting position | variable |
| Operating/Storage temperature | -45 to +80°C (-49 to +176°F) |
| Operating/Storage humidity | max. 90% RH (non-condensing) |
| Protection type | IP20 |
¹ When connecting with stranded wires, wire end ferrules must be used.
Important note: The contact system of the regulator is subjected to environmental influences, thus the contact resistance may change. This can lead to a voltage drop and/or self-heating of the contacts.
| Setting range | Art. No. Contact breaker (NC) | Art. No. Contact maker (NO) | Approvals | |||
|---|---|---|---|---|---|---|
| 0 to +60°C | 01140.0-00 | 01141.0-00 | VDE | - | - | EAC |
| -10 to +50°C | 01142.0-00 | 01143.0-00 | VDE | UL File No. E164102 | - | EAC |
| +20 to +80°C | 01159.0-00 | 01158.0-00 | VDE | UL File No. E164102 | CSA | EAC |
| +32 to +140°F | 01140.9-00 | 01141.9-00 | VDE | UL File No. E164102 | CSA | EAC |
| +14 to +122°F | 01142.9-00 | 01143.9-00 | VDE | UL File No. E164102 | CSA | EAC |
| 0 to +60°C | 01146.9-00 | 01147.9-00 | VDE | UL File No. E164102 | CSA | EAC |
---
Hãy liên hệ với chúng tôi để được hỗ trợ tốt nhất :
Hot line : 0948927248
Email : giao.ans@ansvietnam.com
---
SEMICONDUCTOR HEATER
HG 140 | 15W TO 150W
These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly. The heaters are designed for permanent operation. Pressure clamb connectors save time and simplify installation.
| perating voltage | 120-240V AC/DC¹ (min. 110V, max. 265V) |
|---|---|
| Heating element | PTC resistor - temperature limiting |
| Heater body | extruded aluminium profile, anodised |
| Connection | 3 pressure clamps for stranded wire 0.5-1.5mm² (with wire |
| end ferrule) and rigid wire 0.5- 2.5mm² | |
| Connection casing | plastic according to UL94 V-0, black |
| Mounting | clip for 35mm DIN rail, EN 60715 |
| Fitting position | vertical airflow (air outlet up, connection on bottom) |
| Operating/Storage temperature | -45 to +70°C (-49 to +158°F) |
| Operating/Storage humidity | max. 90% RH (non-condensing) |
| Protection type/Protection class | IP20 / I (earthed) |
| Approvals | VDE, UL File No. E150057, EAC |
| Accessoires | screw fixing, Art. No. 09024.0-00 (1 packing unit = 2 pieces) |
| Note | other voltages on request |
¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.
| Art. No. | Heating capacity² | Inrush current max. | Recommended pre-fuse T (time-delay) | Length (L) | Weight (approx.) |
|---|---|---|---|---|---|
| 14000.0-00 | 15W | 1.5A | 2.0A | 65mm | 0.3kg |
| 14001.0-00 | 30W | 3.0A | 4.0A | 65mm | 0.3kg |
| 14003.0-00 | 45W | 3.5A | 4.0A | 65mm | 0.3kg |
| 14005.0-00 | 60W | 2.5A | 4.0A | 140mm | 0.4kg |
| 14006.0-00 | 75W | 4.0A | 6.3A | 140mm | 0.5kg |
| 14007.0-00 | 100W | 4.5A | 8.0A | 140mm | 0.5kg |
| 14008.0-00 | 150W | 9.0A | 10.0A | 220mm | 0.7kg |
² at +20°C (+68°F) ambient temperature
end
Stego Viet Nam
1. Cảm biến bộ sấy KT001140
2. Điện trở sấy R01: HG 14003.0-00
100% Germany Origin | Stego Vietnam | Article Number: 14003.0-00 |
100% Germany Origin | Stego Vietnam | Article Number: 01140.0-00 |
HẾT HẠN
| Mã số : | 14186113 |
| Địa điểm : | Hồ Chí Minh |
| Hình thức : | Cần bán |
| Tình trạng : | Hàng mới |
| Hết hạn : | 19/02/2017 |
| Loại tin : | Thường |
Gợi ý cho bạn
Bình luận