Tempsens Đầu Dò Nhiệt Độ - Giá Tốt Của Đại Lý Phân Phối Chính Thứccủa Tempsens T

Liên hệ

Phường 3, Bình Thạnh, Hồ Chí Minh, Việt Nam

ANS

Công ty ANS Việt Nam là công ty hàng đầu chuyên cung cấp các thiết bị tự dộng, dây chuyền máy móc, đại lý phân phối chính thức cho nhiều hãng hàng đầu thế giới chuyên về sản xuất máy móc thiết bị điện tử công nghiệp.

Hãy liên hệ với chúng tôi dể có được sự tư vấn, phục vụ tốt nhất.

Sđt liên hệ: 0903618841 – Mr tung

Email: tung.ans@ansvietnam.com

Yahoo: tung_ans

Skype: tung.ans

Được hợp tác với quý khách là thành công của chúng tôi !


Tempsens VietnamTempsens make “R” type Thermocouple with IP-67 head, Terminal & Ceramic block:- Element PtRh13%Pt “R” type, Simplex, Ungrounded, Cali.: ANSI MC 96.1, Insulation: 2 hole Ceramic Ker-710 tube, 4.5mm Diameter, Outer: Ceramic Ker-710, OD x ID: 17x13mm, Inner: Ceramic Ker-710, OD x ID: 10x6mm, Holding Tube: Material: SS-316, OD x ID; 26x21x200mm, Process Connection: DN25(1”) JIS B2220 SS-304Flange, Exposed Length: 500mm, Length below head: 700mm
(Full-go
Model: R1600)
Tempsens VietnamTempsens make “R” type Thermocouple with IP-67 head, Terminal & Ceramic block:- Element PtRh13%Pt “R” type, Simplex, Ungrounded, Cali.: ANSI MC 96.1, Insulation: 2 hole Ceramic Ker-710 tube, 8.5mm Diameter, Outer: Silicon Carbide, OD x ID: 25x19(+/-2)mm, Inner: Ceramic Ker-710, OD x ID: 15x10mm, Holding Tube: Material: SS-316, OD x ID: 32x26x200mm, Process Connection: DN25(1”) JIS B2220 SS-304Flange, Exposed Length: 500mm, Length below head: 700mm
Tempsens VietnamThermowells - Type K ( 0 - 1300 Deg C)
ID: 8 mm
OD: 16 mm
Length: 1150 mm
Material: SS310
Tempsens Make “K” type Thermocouple with Head IP-67, Terminal & Ceramic block: - Element: Cr/AL "K" Type, Simplex, Ungrounded, Calibration: ANSI-MC 96.1, Insulation: Mineral Insulated, Sheath Diameter: 6mm, Sheath Material: SS-310, Thermo well: Material: SS-310, OD x ID: 16x8(+/-0.5) mm, Length below Head: 1150mm, Temp.  Range: 0 to 1300 Deg. C
Note: we can understand you require Cable gland ¾” NPT instead of ½” NPT as shown in drawing. But please note that in this Head (IP-67) we normally provide ½” NPT (M) Gland because it is standard.
Tempsens Vietnam“K” Type Thermocouple
Mode: T200
Specification:
Type : K
Junction style : GN
Sheat diametter : 1mm
Sheat materia : 316
Nominal length : 250mm
Type of cable : A
Calbe length: 2m
Range: 1-1300 oC
Tempsens Make “K” type Thermocouple with 2Mtr. Long Teflon/Teflon Insulated Flexible Cable, Sealpot: - Element: Cr/AL "K" Type, Simplex, Grounded, Calibration: ANSI-MC 96.1, Insulation: Mineral Insulated, Sheath Diameter: 1mm, Sheath Material: Inconel-600(SS-316 is not suitable for temp. range upto 1300Deg.C), Length below seal pot: 250mm, Temp.  Range: 0 to 1300 Deg.
Tempsens VietnamReplaced by: Tempsens make RTD with 914mm(36”) long PTFE Insulated Flexible Cable, Spring & Seal pot: - Element: Pt-100x1, Simplex, 3 Wire, Calibration: DIN-43760, Sheath Diameter: 6mm, Sheath Material: SS-316,  Sheath Length; 457mm(18”)
(Code: S51PA180Z36)
Tempsens VietnamReplaced by: Tempsens make RTD with Head IP-67, Terminal & Ceramic block: - Element: Pt-100x1, Simplex, 3 Wire, Calibration: DIN-43760, Sheath Diameter: 6mm, Sheath Material: SS-316, Process Connection: ½”-14NPT(M) Connector, Length below Connector: 300mm
(Code: FG110-1) 
Tempsen VietnamConverted by: Tempsens make "R" type Thermocouple with Connection "IP-67" head, Head Mounted Temp. Transmittter:- Element PtRh13%Pt "R" type, Simplex, Ungrounded, Calibration.: ANSI MC 96.1, Insulation: 2 hole Ceramic Insulating tube, 5.5mm Diameter, Process Connection: 2" ANSI B16.5 150# RF S.S. Fixed Flange, Outer Tube: Ceramic Ker-710, OD x ID: 17x13mm, Inner Tube: Ceramic Ker-710, OD x ID: 10x6mm, Holding tube: SS-316, OD xID x L: 22x18x100mm, Exposed Length: 1200mm, Length below head: 1300mm, Tag no.: TT-2921 & TT-2928, Temp. Range: 0 to 1300 Deg. C
(Baumer
Tag No.: TT-2921)
Tempsen VietnamConverted by: Tempsens make "R" type Thermocouple with Connection "IP-67" head, Head Mounted Temp. Transmittter:- Element PtRh13%Pt "R" type, Simplex, Ungrounded, Calibration.: ANSI MC 96.1, Insulation: 2 hole Ceramic Insulating tube, 5.5mm Diameter, Process Connection: 2" ANSI B16.5 150# RF S.S. Fixed Flange, Outer Tube: Ceramic Ker-710, OD x ID: 17x13mm, Inner Tube: Ceramic Ker-710, OD x ID: 10x6mm, Holding tube: SS-316, OD xID x L: 22x18x100mm, Exposed Length: 1200mm, Length below head: 1300mm, Tag no.: TT-2921 & TT-2928, Temp. Range: 0 to 1300 Deg. C
(Baumer
Tag No.: TT-2928)
Tempsens VietnamTempsens make drilled bar stock thermowell: -Material: SS-304, ODxID: 12x6.5mm(+/-0.5mm), End Thickness: 2mm, Process Connection: 1/2" NPT(M), Instrument Connection: 1/2" NPT(F), Insertion Length (U): 92mm, "T" length: 25mm, Total length: 117mm
(Wise
Pipe type Thermowell with thread connection
Model: A5000
Code: A5000BX0FFAA100
"T" length: 45mm
"U" length: 100mm
(Code: A5000BX0BCAA100))
Tempsens VietnamMultipoint Thermocouple
Type : K , 0 – 1200 oC
Adj. Flange : #150
Inconel 600
L = 700 mm
Multi point in a tube  : 550 / 700 mm
Φ 6mm
Details as:
Tempsens Make “K” type Multipoint (2 Nos. Sensor)Thermocouple with unction box: - Element: Cr/Al  "K" Type, Simplex(2 wire), Ungrounded, Calibration: ANSI-MC 96.1, Insulation: Mineral Insulated, Sheath Diameter: 6mm, Sheath Material: Inconel-600, Process Connection: 1” ANSI B16.5 150# RF SS Flange, Thermo well: Material Inconel-600, OD x ID: 25x18(+/-1)mm,  1st Sensor Length below JB: 550mm, 2nd Sensor Length below JB: 700mm.,Temp. Range: 0 to 1200Deg.C
Tempsens VietnamTempsens make RTD with Head "IP-67" type, Head Mounted Temperature Transmitter: Element:PT-100x1, 3 Wire, Simplex, Cali: DIN-43760, insulation: Mineral Insulated, Sheath Dia: 4.5mm, Sheath Material: SS-316, Mounting: 1/2" NPT(M) Adj. Comp. Fitting,  Process Connection: 1/2" NPT(M) thread, Thermowell: Material: SS-316, ODxID: 12x8mm, "T" Length: 50mm, Extension Length: 50mm, Immersion Length "U": 200mm, TemperatureRange : -30 - 60Deg.C
(T-101
PT-100 RTD with Temperature Transmitters
Type : J                                     
Type: Head Mounted Type             Blub Dia: 5mm  
Stem length: 200mm                     Range: -30o C to 60oC) 
Tempsens VietnamTempsens make RTD with Head "IP-67" type, Head Mounted Temperature Transmitter: Element:PT-100x1, 3 Wire, Simplex, Cali: DIN-43760, insulation: Mineral Insulated, Sheath Dia: 4.5mm, Sheath Material: SS-316, Mounting: 1/2" NPT(M) Adj. Comp. Fitting,  Process Connection: 1/2" NPT(M) thread, Thermowell: Material: SS-316, ODxID: 12x8mm, "T" Length: 50mm, Extension Length: 50mm, Immersion Length "U": 100mm, Temp. Range: -10-60 Deg. C.
(T-101
PT-100 RTD with Temperature Transmitters
Type : J                                     
Type: Head Mounted Type               
Blub Dia: 5mm   ,Stem length: 100mm                      
Range: -10o C to 60oC
Q’ ty : 12 pcs
With   Thermowell Threaded Straight  ( detail like above but length difference ))
Tempsens VietnamTempsens Make RTD with 2 Mtr. Long Teflon/Teflon Insulated Flexible Cable: -Element: Pt-100x1, Simplex, 3 Wire, Calibration: DIN-43760, Mineral Insulated, Sheath Dia: 3mm, Sheath Material: SS-316, Process Connection: ½” NPT (M) thread, Immersion Length: 128mm spring to end of sensor, Qty.: 24 Nos., Temp. Range: 20 to 200Deg.C, Other details as per our enclosed drawing No. 496307
Note: we have quoted our standard dimensions please check with your sample & let us know exactly we will provide accordingly if there any mismatch
(Ther.Resis. PT100
T 204
Range : 20 – 200 oC , Thread 1/2 NPT , length  128 mm from spring to end of sensor, 3 wire) 
Tempsens Vietnam Tempsens make "S" type Thermocouple with AUZH Type head, Head Mounted Temp. Transmitter:- Element : Pt-Rh10% Pt- "S" Type, Simplex, Ungrounded, Cali.: ANSI MC 96.1, Element Dia: 0.50mm, Insulation: 2 Hole Ceramic Insulating Tube 8.5mm Dia with hole dia 1.5mm, Inner Tube: Ceramic Ker-710, OD x ID: 15x10mm, Outer Tube: Ceramic Ker-710, OD x ID: 24x18mm, Supporting Tube: SS-316, ODxWTxL:32x2x200mm, Exposed Length: 510mm, Length below head: 710mm, Temp. Range. 1600Deg.C
(Airheater BB40
7-0000-U)
Tempsens VietnamTempsens make “R” type Thermocouple with IP-67 head, Terminal & Ceramic block:- Element PtRh13%Pt “R” type, Simplex, Ungrounded, Cali.: ANSI MC 96.1, Insulation: 2 hole Ceramic Ker-710 tube, 4.5mm Diameter, Outer: Ceramic Ker-710, OD x ID: 17x13mm, Inner: Ceramic Ker-710, OD x ID: 10x6mm, Holding Tube: Material: SS-316, OD x ID; 26x21x200mm, Process Connection: DN25(1”) JIS B2220 SS-304Flange, Exposed Length: 500mm, Length below head: 700mm., Other details as per our enclosed drawing no.: 493061
(Code: R 1600 - F25xL500mm)
Tempsens VietnamTempsens make “R” type Thermocouple with IP-67 head, Terminal & Ceramic block:- Element PtRh13%Pt “R” type, Simplex, Ungrounded, Cali.: ANSI MC 96.1, Insulation: 2 hole Ceramic Ker-710 tube, 8.5mm Diameter, Outer: Silicon Carbide, OD x ID: 25x19(+/-2)mm, Inner: Ceramic Ker-710, OD x ID: 15x10mm, Holding Tube: Material: SS-316, OD x ID: 32x26x200mm, Process Connection: DN25(1”) JIS B2220 SS-304Flange, Exposed Length: 500mm, Length below head: 700mm, Other details as per our enclosed drawing no.: 493062
Tempsens VietnamMODEL: AST E 450C PL (AST E450C PL)
INFRARED NONCONTACT RADITION ONLINE PYROMETER WITH LCD DISPLAY AND KEYPAD FOR PARAMETERIZING, EXTENDED SENSOR HEAD WITH 3MTR CABLE & LASER TARGETTING LIGHT
MAKE: AST, ISRAEL
RANGE: 800C....2500C
OUTPUT: 4...20MA
ACCURACY: +/- 0.5% OF THE MEASURED VALUE +1C
REPETABILITY: 0.1% reading in °C + 1°C,
RESPONSE TIME: 20 MSEC ADJUSTABLE UPTO 10 SEC,
POWER: 24 VDC,
INTERFACE:USB 2.0
EMISSIVITY: 0.1.......1ADJUSTABLE,
SIGHTING:LASER
Tempsens VietnamPYROMETER ACCESSORIES
ADJUSTABLE MOUNTING FOR SENSOR HEAD
REF NO : (8200-03)
Tempsens VietnamPYROMETER ACCESSORIES
AIR PURGE UNIT FOR SENSOR HEAD
REF NO : (8200-01)
Tempsens VietnamTEMPSENS MAKE "R" TYPE THERMOCOUPLE WITH IP-67
HEAD TERMINAL & CERAMIC BLOCK, ELEMENT: PT-RH13%PT "R" TYPE, SIMPLEX, UNGROUNDED, CALIBRATION: ANSI MC 96.1, INSULATION:2 HOLE CERAMIC KER-710, 5.5MM DIAMETER, OUTER TUBE: CERAMIC KER-710 ODXID: 17X13MM, INNER : CERAMIC KER-710,ODXID :10X7 MM, HOLDING TUBE: SS, ODXIDXLENGTH:
22X18X150MM,EXPOSED LENGTH: 350MM, LENGTH BELOW HEAD:
500MM, OTHER DETAIL AS PER OUR DRG.NO.:FG14-502899
(Model: R 1600o- F 17xL500mm)
Tempsens VietnamTEMPSENS MAKE RTD WITH IP-65 DIE CAST ALUMINUM HEAD, TERMINAL & CERAMIC BLOCK: ELEMENT: PT-100X1, SIMPLEX, 2 WIRE, CALI. DIN-43760, INSULATION: MINERAL INSULATED, SHEATH OUTER DIAMETER: 6MM, SHEATH MATERIAL SS-316, LENGTH BELOW HEAD: 160MM
Code: R-100/A/D/W2/6/316/160mm 
Tempsens VietnamTEMPSENS MAKE RTD WITH IP-65 DIE CAST ALUMINUM HEAD, TERMINAL & CERAMIC BLOCK: ELEMENT: PT-100X1, SIMPLEX, 2 WIRE, CALI. DIN-43760, INSULATION: MINERAL INSULATED, SHEATH OUTER DIAMETER: 6MM, SHEATH MATERIAL SS-316, LENGTH BELOW HEAD: 800MM
Code: R-100/A/D/W2/6/316/800mm 
Tempsens VietnamTEMPSENS MAKE RTD WITH 3 MTR. LONG TEFLON/TEFLON
INSULATED FLEXIBLE CABLE:- ELEMENT: PT-100X2, DUPLEX, 3 WIRE, CLASS B, CALI: DIN-43760/EN60751, SENSOR MATERIAL:
SS-316/321, SENSOR DIA: 4.8MM, SENSOR LENGTH: 15MM,
(TEMPERATURE ELEMENT, RTD (BEARING TEMPERATURE), TYPE: 2XPT100/3WIRE,
SENSOR TOP MATERIAL: 321 S.S/IP68
DITTMER
CLASS: B/EN60751, SENSOR DIA: 4.8 MM,
SENSOR LENGTH: 15 MM)
Tempsens VietnamTEMPSENS MAKE RTD WITH 3 MTR. LONG TEFLON/TEFLON
INSULATED FLEXIBLE CABLE:- ELEMENT: PT-100X2, DUPLEX, 3 WIRE, CLASS A, CALI: DIN-43760/EN60751, SENSOR MATERIAL:
SS-316/321, SENSOR DIA: 3.2MM, SENSOR LENGTH: 30MM
(TEMPERATURE ELEMENT, RTD (BEARING TEMPERATURE), TYPE: 2XPT100/3WIRE,
SENSOR TOP MATERIAL: 321 S.S/IP68
DITTMER
CLASS: A/EN60751, SENSOR DIA:  3.2 MM,
SENSOR LENGTH: 30 MM)
Tempsens VietnamTEMPSENS MAKE "K" TYPE THERMOCOUPLE WITH HEAD IP-67, TERMINAL & CERAMIC BLOCK: - ELEMENT: CR/AL "K" TYPE, SIMPLEX, UNGROUNDED, CALIBRATION: ANSI-MC 96.1, INSULATION: CERAMIC BEADS, SENSOR DIAMETER: 3.2MM, OUTER THERMO WELL : MATERIAL: HRS-446, OD: 22 MM, COATING MATERIAL: TUNGESTEN CARBIDE 600MM LONG, TOTAL LENGTH BELOW HEAD: 1000MM, TEMP. RANGE: 0 TO 1600 DEG. C, OTHER DETAIL AS PER OUR DRAWING NO.: FG14-504435.
Tempsens VietnamTEMPSENS MAKE THERMOCOUPLE:- ELEMENT: PT-RH-10%-PT "S" TYPE, TYPE: SIMPLEX, UNGROUNDED, HEAD: DIE CAST ALU. IP-67, TERMINALS & CERAMIC BLOCK, CALI:
ANSI MC 96.1, INSU: CERAMIC KER-710 TUBE, 2 HOLE DIA 5.5MM, INNER TUBE: CERAMIC KER-710, ODXID: 12X8MM, OUTER TUBE: CERAMIC KER-710, ODXID: 20X15MM, HOLDING: SS-310, ODXIDXLENGTH: 26X22X200MM(+/-1), CERAMIC EXPOSED LENGTH: 550MM, LENGTH BELOW HEAD: 750MM, TEMP. RANGE: 0 TO 1600 DEG. C, OTHER DETAIL AS PER OUR DRAWING NO. FG14-504436.
(Thermocouple S)
Tempsens VietnamTEMPSENS MAKE RTD WITH HEAD IP-67,TERMINAL & CERAMIC BLOCK: ELEMENT:PT-100X1, 3 WIRE, SIMPLEX, CALI: DIN-43760, INSULATION: MINERAL INSULATED, SHEATH DIA: 6MM, SHEATH MATERIAL: SS-316, OUTER THERMOWELL: MATERIAL: HRS-446, OD: 22 MM, TOTAL LENGTH BELOW HEAD: 1000MM, OTHER DETAIL AS PER OUR DRAWING NO.: FG14-504437.
(Can đo nhiệt độ Pt 100)
Tempsens VietnamTEMPSENS MAKE RTD WITH THERMOWELL:- ELEMENT: PT-100X1, SIMPLEX, 3 WIRE, HEAD: DIE CAST ALU.IP-67
WITH TERMINAL & CERAMIC BLOCK, CABLE ENTRY: 1/2" NPT(F)
WITH CABLE GLAND, STANDARD: CALI: ANSI MC 96.1,INSULATION:
MINERAL INSULATED, SHEATH MATERIAL: SS-316,SHEATH DIA:
8MM, N/U/N: SS,1/2" SCH.80,I/2"NPT(M),EXT. LENGTH: 100MM,
SHEATH LENGTH: 400MM BELOW HEAD, THERMOWELL:-
MATERIAL: SS-316, DRILLED BAR STOCK,WELL DIA: OD: 22 TO
19MM TAPERED, PROCESS CONN: 1" 300 #RF SS-316. FLANGE,
WELDED, COATING: 0.5MM THICK PTFE COATING OVER IMM.
LENGTH & FLANGE RF, INST. CONN.: 1/2" NPT(F), "T" LENGTH:
50MM, IMM. LENGTH: 250MM, T/WELL LENGTH: 300MM
(Type: R-734) 
Tempsens VietnamConverted by tempsens:
TEMPSENS MAKE RTD :-ELEMENT: PT-100X1,
TYPE: SIMPLEX, 3 WIRES, CLASS B,
HEAD: DIE CAST ALU. IP-67 TERMINAL & CERAMIC BLOCK,
CABLE ENTRY: 1/2" NPT (F) WITH CABLE GLAND,
STANDARD: CALI: DIN-43760,
INSULATION: MINERAL INSULATED,
SHEATH MATERIAL: SS-316,
SHEATH DIA: 6.3MM
END CONNECTION:1/2" BSP(M),LENGTH:21.5MM.
SHEATH LENGTH: 100MM BELOW END CONNECTION,
TEMP. RANGE: 0 TO 400 DEG. C, OTHER DETAILS AS PER DRAWING.
(Cảm biến nhiệt độ RTD- PT 100)
Tempsens VietnamTempsens make “R” type Thermocouple with IP-67 head, Terminal & Ceramic block:- Element PtRh13%Pt “R” type, Simplex, Ungrounded, Cali.: ANSI MC 96.1, Insulation: 2 hole Ceramic Ker-710 tube, 4.5mm Diameter, Outer: Ceramic Ker-710, OD x ID: 17x13mm, Inner: Ceramic Ker-710, OD x ID: 10x6mm, Holding Tube: Material: SS-316, OD x ID; 26x21x200mm, Process Connection: DN25(1”) JIS B2220 SS-304Flange, Exposed Length: 500mm, Length below head: 700mm
(Full-go
Model: R1600)
Tempsens VietnamTempsens make “R” type Thermocouple with IP-67 head, Terminal & Ceramic block:- Element PtRh13%Pt “R” type, Simplex, Ungrounded, Cali.: ANSI MC 96.1, Insulation: 2 hole Ceramic Ker-710 tube, 8.5mm Diameter, Outer: Silicon Carbide, OD x ID: 25x19(+/-2)mm, Inner: Ceramic Ker-710, OD x ID: 15x10mm, Holding Tube: Material: SS-316, OD x ID: 32x26x200mm, Process Connection: DN25(1”) JIS B2220 SS-304Flange, Exposed Length: 500mm, Length below head: 700mm
Tempsens VietnamTempsens make RTD with Head "IP-67" type, Head Mounted Temperature Transmitter: Element:PT-100x1, 3 Wire, Simplex, Cali: DIN-43760, insulation: Mineral Insulated, Sheath Dia: 4.5mm, Sheath Material: SS-316, Mounting: 1/2" NPT(M) Adj. Comp. Fitting,  Process Connection: 1/2" NPT(M) thread, Thermowell: Material: SS-316, ODxID: 12x8mm, "T" Length: 50mm, Extension Length: 50mm, Immersion Length "U": 200mm, TemperatureRange : -30 - 60Deg.C
(T-101
PT-100 RTD with Temperature Transmitters
Type : J                                     
Type: Head Mounted Type             Blub Dia: 5mm  
Stem length: 200mm                     Range: -30o C to 60oC) 
Tempsens VietnamTempsens make RTD with Head "IP-67" type, Head Mounted Temperature Transmitter: Element:PT-100x1, 3 Wire, Simplex, Cali: DIN-43760, insulation: Mineral Insulated, Sheath Dia: 4.5mm, Sheath Material: SS-316, Mounting: 1/2" NPT(M) Adj. Comp. Fitting,  Process Connection: 1/2" NPT(M) thread, Thermowell: Material: SS-316, ODxID: 12x8mm, "T" Length: 50mm, Extension Length: 50mm, Immersion Length "U": 100mm, Temp. Range: -10-60 Deg. C.
(T-101
PT-100 RTD with Temperature Transmitters
Type : J                                     
Type: Head Mounted Type               
Blub Dia: 5mm   ,Stem length: 100mm                      
Range: -10o C to 60oC
Q’ ty : 12 pcs
With   Thermowell Threaded Straight  ( detail like above but length difference ))
Tempsens VietnamTempsens Make RTD with 2 Mtr. Long Teflon/Teflon Insulated Flexible Cable: -Element: Pt-100x1, Simplex, 3 Wire, Calibration: DIN-43760, Mineral Insulated, Sheath Dia: 3mm, Sheath Material: SS-316, Process Connection: ½” NPT (M) thread, Immersion Length: 128mm spring to end of sensor, Qty.: 24 Nos., Temp. Range: 20 to 200Deg.C, Other details as per our enclosed drawing No. 496307
Note: we have quoted our standard dimensions please check with your sample & let us know exactly we will provide accordingly if there any mismatch
(Ther.Resis. PT100
T 204
Range : 20 – 200 oC , Thread 1/2 NPT , length  128 mm from spring to end of sensor, 3 wire) 
Tempsens Vietnam Tempsens make "S" type Thermocouple with AUZH Type head, Head Mounted Temp. Transmitter:- Element : Pt-Rh10% Pt- "S" Type, Simplex, Ungrounded, Cali.: ANSI MC 96.1, Element Dia: 0.50mm, Insulation: 2 Hole Ceramic Insulating Tube 8.5mm Dia with hole dia 1.5mm, Inner Tube: Ceramic Ker-710, OD x ID: 15x10mm, Outer Tube: Ceramic Ker-710, OD x ID: 24x18mm, Supporting Tube: SS-316, ODxWTxL:32x2x200mm, Exposed Length: 510mm, Length below head: 710mm, Temp. Range. 1600Deg.C
(Airheater BB40
7-0000-U)
Tempsens VietnamTempsens make “R” type Thermocouple with IP-67 head, Terminal & Ceramic block:- Element PtRh13%Pt “R” type, Simplex, Ungrounded, Cali.: ANSI MC 96.1, Insulation: 2 hole Ceramic Ker-710 tube, 4.5mm Diameter, Outer: Ceramic Ker-710, OD x ID: 17x13mm, Inner: Ceramic Ker-710, OD x ID: 10x6mm, Holding Tube: Material: SS-316, OD x ID; 26x21x200mm, Process Connection: DN25(1”) JIS B2220 SS-304Flange, Exposed Length: 500mm, Length below head: 700mm., Other details as per our enclosed drawing no.: 493061
(Code: R 1600 - F25xL500mm)
Tempsens VietnamTempsens make “R” type Thermocouple with IP-67 head, Terminal & Ceramic block:- Element PtRh13%Pt “R” type, Simplex, Ungrounded, Cali.: ANSI MC 96.1, Insulation: 2 hole Ceramic Ker-710 tube, 8.5mm Diameter, Outer: Silicon Carbide, OD x ID: 25x19(+/-2)mm, Inner: Ceramic Ker-710, OD x ID: 15x10mm, Holding Tube: Material: SS-316, OD x ID: 32x26x200mm, Process Connection: DN25(1”) JIS B2220 SS-304Flange, Exposed Length: 500mm, Length below head: 700mm, Other details as per our enclosed drawing no.: 493062
Tempsens VietnamMODEL: AST E 450C PL (AST E450C PL)
INFRARED NONCONTACT RADITION ONLINE PYROMETER WITH LCD DISPLAY AND KEYPAD FOR PARAMETERIZING, EXTENDED SENSOR HEAD WITH 3MTR CABLE & LASER TARGETTING LIGHT
MAKE: AST, ISRAEL
RANGE: 800C....2500C
OUTPUT: 4...20MA
ACCURACY: +/- 0.5% OF THE MEASURED VALUE +1C
REPETABILITY: 0.1% reading in °C + 1°C,
RESPONSE TIME: 20 MSEC ADJUSTABLE UPTO 10 SEC,
POWER: 24 VDC,
INTERFACE:USB 2.0
EMISSIVITY: 0.1.......1ADJUSTABLE,
SIGHTING:LASER
Tempsens VietnamPYROMETER ACCESSORIES
ADJUSTABLE MOUNTING FOR SENSOR HEAD
REF NO : (8200-03)
Tempsens VietnamPYROMETER ACCESSORIES
AIR PURGE UNIT FOR SENSOR HEAD
REF NO : (8200-01)
Tempsens VietnamTEMPSENS MAKE "R" TYPE THERMOCOUPLE WITH IP-67
HEAD TERMINAL & CERAMIC BLOCK, ELEMENT: PT-RH13%PT "R" TYPE, SIMPLEX, UNGROUNDED, CALIBRATION: ANSI MC 96.1, INSULATION:2 HOLE CERAMIC KER-710, 5.5MM DIAMETER, OUTER TUBE: CERAMIC KER-710 ODXID: 17X13MM, INNER : CERAMIC KER-710,ODXID :10X7 MM, HOLDING TUBE: SS, ODXIDXLENGTH:
22X18X150MM,EXPOSED LENGTH: 350MM, LENGTH BELOW HEAD:
500MM, OTHER DETAIL AS PER OUR DRG.NO.:FG14-502899
(Model: R 1600o- F 17xL500mm)
Tempsens VietnamTEMPSENS MAKE RTD WITH IP-65 DIE CAST ALUMINUM HEAD, TERMINAL & CERAMIC BLOCK: ELEMENT: PT-100X1, SIMPLEX, 2 WIRE, CALI. DIN-43760, INSULATION: MINERAL INSULATED, SHEATH OUTER DIAMETER: 6MM, SHEATH MATERIAL SS-316, LENGTH BELOW HEAD: 160MM
Code: R-100/A/D/W2/6/316/160mm 
Tempsens VietnamTEMPSENS MAKE RTD WITH IP-65 DIE CAST ALUMINUM HEAD, TERMINAL & CERAMIC BLOCK: ELEMENT: PT-100X1, SIMPLEX, 2 WIRE, CALI. DIN-43760, INSULATION: MINERAL INSULATED, SHEATH OUTER DIAMETER: 6MM, SHEATH MATERIAL SS-316, LENGTH BELOW HEAD: 800MM
Code: R-100/A/D/W2/6/316/800mm 
Tempsens VietnamTEMPSENS MAKE RTD WITH 3 MTR. LONG TEFLON/TEFLON
INSULATED FLEXIBLE CABLE:- ELEMENT: PT-100X2, DUPLEX, 3 WIRE, CLASS B, CALI: DIN-43760/EN60751, SENSOR MATERIAL:
SS-316/321, SENSOR DIA: 4.8MM, SENSOR LENGTH: 15MM,
(TEMPERATURE ELEMENT, RTD (BEARING TEMPERATURE), TYPE: 2XPT100/3WIRE,
SENSOR TOP MATERIAL: 321 S.S/IP68
DITTMER
CLASS: B/EN60751, SENSOR DIA: 4.8 MM,
SENSOR LENGTH: 15 MM)
Tempsens VietnamTEMPSENS MAKE RTD WITH 3 MTR. LONG TEFLON/TEFLON
INSULATED FLEXIBLE CABLE:- ELEMENT: PT-100X2, DUPLEX, 3 WIRE, CLASS A, CALI: DIN-43760/EN60751, SENSOR MATERIAL:
SS-316/321, SENSOR DIA: 3.2MM, SENSOR LENGTH: 30MM
(TEMPERATURE ELEMENT, RTD (BEARING TEMPERATURE), TYPE: 2XPT100/3WIRE,
SENSOR TOP MATERIAL: 321 S.S/IP68
DITTMER
CLASS: A/EN60751, SENSOR DIA:  3.2 MM,
SENSOR LENGTH: 30 MM)
Tempsens VietnamTEMPSENS MAKE "K" TYPE THERMOCOUPLE WITH HEAD IP-67, TERMINAL & CERAMIC BLOCK: - ELEMENT: CR/AL "K" TYPE, SIMPLEX, UNGROUNDED, CALIBRATION: ANSI-MC 96.1, INSULATION: CERAMIC BEADS, SENSOR DIAMETER: 3.2MM, OUTER THERMO WELL : MATERIAL: HRS-446, OD: 22 MM, COATING MATERIAL: TUNGESTEN CARBIDE 600MM LONG, TOTAL LENGTH BELOW HEAD: 1000MM, TEMP. RANGE: 0 TO 1600 DEG. C, OTHER DETAIL AS PER OUR DRAWING NO.: FG14-504435.
Tempsens VietnamTEMPSENS MAKE THERMOCOUPLE:- ELEMENT: PT-RH-10%-PT "S" TYPE, TYPE: SIMPLEX, UNGROUNDED, HEAD: DIE CAST ALU. IP-67, TERMINALS & CERAMIC BLOCK, CALI:
ANSI MC 96.1, INSU: CERAMIC KER-710 TUBE, 2 HOLE DIA 5.5MM, INNER TUBE: CERAMIC KER-710, ODXID: 12X8MM, OUTER TUBE: CERAMIC KER-710, ODXID: 20X15MM, HOLDING: SS-310, ODXIDXLENGTH: 26X22X200MM(+/-1), CERAMIC EXPOSED LENGTH: 550MM, LENGTH BELOW HEAD: 750MM, TEMP. RANGE: 0 TO 1600 DEG. C, OTHER DETAIL AS PER OUR DRAWING NO. FG14-504436.
(Thermocouple S)
Tempsens VietnamTEMPSENS MAKE RTD WITH HEAD IP-67,TERMINAL & CERAMIC BLOCK: ELEMENT:PT-100X1, 3 WIRE, SIMPLEX, CALI: DIN-43760, INSULATION: MINERAL INSULATED, SHEATH DIA: 6MM, SHEATH MATERIAL: SS-316, OUTER THERMOWELL: MATERIAL: HRS-446, OD: 22 MM, TOTAL LENGTH BELOW HEAD: 1000MM, OTHER DETAIL AS PER OUR DRAWING NO.: FG14-504437.
(Can đo nhiệt độ Pt 100)
Tempsens VietnamTEMPSENS MAKE RTD WITH THERMOWELL:- ELEMENT: PT-100X1, SIMPLEX, 3 WIRE, HEAD: DIE CAST ALU.IP-67
WITH TERMINAL & CERAMIC BLOCK, CABLE ENTRY: 1/2" NPT(F)
WITH CABLE GLAND, STANDARD: CALI: ANSI MC 96.1,INSULATION:
MINERAL INSULATED, SHEATH MATERIAL: SS-316,SHEATH DIA:
8MM, N/U/N: SS,1/2" SCH.80,I/2"NPT(M),EXT. LENGTH: 100MM,
SHEATH LENGTH: 400MM BELOW HEAD, THERMOWELL:-
MATERIAL: SS-316, DRILLED BAR STOCK,WELL DIA: OD: 22 TO
19MM TAPERED, PROCESS CONN: 1" 300 #RF SS-316. FLANGE,
WELDED, COATING: 0.5MM THICK PTFE COATING OVER IMM.
LENGTH & FLANGE RF, INST. CONN.: 1/2" NPT(F), "T" LENGTH:
50MM, IMM. LENGTH: 250MM, T/WELL LENGTH: 300MM
(Type: R-734) 
Tempsens VietnamConverted by tempsens:
TEMPSENS MAKE RTD :-ELEMENT: PT-100X1,
TYPE: SIMPLEX, 3 WIRES, CLASS B,
HEAD: DIE CAST ALU. IP-67 TERMINAL & CERAMIC BLOCK,
CABLE ENTRY: 1/2" NPT (F) WITH CABLE GLAND,
STANDARD: CALI: DIN-43760,
INSULATION: MINERAL INSULATED,
SHEATH MATERIAL: SS-316,
SHEATH DIA: 6.3MM
END CONNECTION:1/2" BSP(M),LENGTH:21.5MM.
SHEATH LENGTH: 100MM BELOW END CONNECTION,
TEMP. RANGE: 0 TO 400 DEG. C, OTHER DETAILS AS PER DRAWING.
(Cảm biến nhiệt độ RTD- PT 100)
Tempsens VietnamTempsens make “R” type Thermocouple with IP-67 head, Terminal & Ceramic block:- Element PtRh13%Pt “R” type, Simplex, Ungrounded, Cali.: ANSI MC 96.1, Insulation: 2 hole Ceramic Ker-710 tube, 4.5mm Diameter, Outer: Ceramic Ker-710, OD x ID: 17x13mm, Inner: Ceramic Ker-710, OD x ID: 10x6mm, Holding Tube: Material: SS-316, OD x ID; 26x21x200mm, Process Connection: DN25(1”) JIS B2220 SS-304Flange, Exposed Length: 500mm, Length below head: 700mm
(Full-go
Model: R1600)
Tempsens VietnamTempsens make “R” type Thermocouple with IP-67 head, Terminal & Ceramic block:- Element PtRh13%Pt “R” type, Simplex, Ungrounded, Cali.: ANSI MC 96.1, Insulation: 2 hole Ceramic Ker-710 tube, 8.5mm Diameter, Outer: Silicon Carbide, OD x ID: 25x19(+/-2)mm, Inner: Ceramic Ker-710, OD x ID: 15x10mm, Holding Tube: Material: SS-316, OD x ID: 32x26x200mm, Process Connection: DN25(1”) JIS B2220 SS-304Flange, Exposed Length: 500mm, Length below head: 700mm

Từ khóa gợi ý: Các Đại Lý Phân Phối Của Đại Lý Phân Phối Đại Lý Phân Phối Đầu Dò Nhiệt Độ Nhiệt Độ Đầu Dò Đại Lý Phân Phối Kia Mở Đại Lý Phân Phối Đại Lý Phân Phối Bia Đại Lý Phân Phối Case Tìm Đại Lý Phân Phối Đại Lý Phân Phối Đường Đại Lý Phân Phối Sim Tìm Đại Lý Phân Phối Nhà Phân Phối Đại Lý Đại Lý Phân Phối 4G Đầu Dò Nhiệt T Đại Lý Phân Phối Thẻ Cào Đại Lý Phân Phối Xe Kia Tìm Đại Lý Phân Phối Sim Đại Lý Phân Phối Máy Lọc

Bình luận

Ttung
Ttung

HẾT HẠN

0164 253 3816
Mã số : 13267967
Địa điểm : Hồ Chí Minh
Hình thức : Cần bán
Tình trạng : Hàng mới
Hết hạn : 23/05/2016
Loại tin :

Thường
Để mua hàng an toàn trên Rao vặt, quý khách vui lòng không thực hiện thanh toán trước cho người đăng tin!

Gợi ý cho bạn

Trao Đổi , Bán , Sửa Chữa Máy Hàn Thành Phố Hồ Chí Minh

Trao Đổi , Bán , Sửa Chữa Máy Hàn Thành Phố Hồ Chí Minh

330.000₫
Xe Lọc Dầu Thủy Lực Di Động, Lọc Hồi Dầu Ren, Bộ Lọc Dầu Bích, Bộ Lọc Dầu Thủy Lực, Xe Lọc Dầu Thủy Lực Di Động

Xe Lọc Dầu Thủy Lực Di Động, Lọc Hồi Dầu Ren, Bộ Lọc Dầu Bích, Bộ Lọc Dầu Thủy Lực, Xe Lọc Dầu Thủy Lực Di Động

Liên hệ
Băng Tải Sampla, Ammeraal Chuyên Cho Ngành Sân Bay. Hàng Châu Âu Chất Lượng Số 1 Thế Giới.

Băng Tải Sampla, Ammeraal Chuyên Cho Ngành Sân Bay. Hàng Châu Âu Chất Lượng Số 1 Thế Giới.

Liên hệ
Máy Thái Thịt Dq1 - Dùng Cho Thịt Tươi Sống

Máy Thái Thịt Dq1 - Dùng Cho Thịt Tươi Sống

Liên hệ
Thông Số Kỹ Thuật Và Chất Lượng Của Bộ Ổn Áp 350Va

Thông Số Kỹ Thuật Và Chất Lượng Của Bộ Ổn Áp 350Va

10.000₫
Tủ Sạc Ắc Quy 110Vdc/100A

Tủ Sạc Ắc Quy 110Vdc/100A

1.000₫
Đầu Cos Pin Rỗng E, Chất Lượng Cao, Nhập Khẩu Trực Tiếp

Đầu Cos Pin Rỗng E, Chất Lượng Cao, Nhập Khẩu Trực Tiếp

1.000₫
Nút Dừng Khẩn-Emergency Stop,

Nút Dừng Khẩn-Emergency Stop,

10.000₫
Quạt Thông Gió Tủ Điện 24Vdc-120X120X38- Chính Hãng Andeli

Quạt Thông Gió Tủ Điện 24Vdc-120X120X38- Chính Hãng Andeli

10.000₫
Cân Sàn Điện Tử Công Nghiệp Fs-Thw - Cân Điện Tử Chi Anh

Cân Sàn Điện Tử Công Nghiệp Fs-Thw - Cân Điện Tử Chi Anh

Liên hệ
Máy Đo Điểm Chớp Cháy Cốc Hở Astm-D92

Máy Đo Điểm Chớp Cháy Cốc Hở Astm-D92

Liên hệ
Bộ Ổn Áp Công Nghiệp (Static Voltage Stabilizers)- Xuất Xứ Hãng Edit - Thổ Nhĩ Kỳ

Bộ Ổn Áp Công Nghiệp (Static Voltage Stabilizers)- Xuất Xứ Hãng Edit - Thổ Nhĩ Kỳ

10.000₫