TRUNG TÂM BÁO CHÁY GST 1 ZONE 2 ZONE 4 ZONE 8 ZONE 16 ZONE ĐẦU BÁO KHÓI GST C-9102,R-6601,S-9102 ĐẦU BÁO NHIỆT GST C-9103 R-6602 ĐẦU BÁO LỬA C-9104 CÔNG TẮC KHẨN DC-9204 CHUÔNG BÁO CHÁY GST-JM CÒI ĐÈN CHỚP C-9401 BEAM BÁO CHÁY GST I-9105 C-9105
BÁO CHÁY GST-ĐẦU BÁO KHÓI GST C9102,R6601,S9102-ĐẦU BÁO NHIỆT C9103 GST-BEAM C9105R GST-CÔNG TẮC KHẨN DC9204 GST-CHUÔNG BÁO CHÁY GST JL-ĐÈN BÁO CHÁY C-9401 GST-TRUNG TÂM BÁO CHÁY GST 104,108,116 ZONE,ĐẦU BÁO GAS GST C-9602LW/LPG
Click để xem ảnh to
GST102A: Trung tâm báo cháy 2 kênh
Model GST102A
Giá Call
2 to 16 zones can be detected, compatible with conventional detectors and manual call points. Each of the 16 detection zones can be individually configured as maximum 15 conventional detectors. The total number of detectors and manual call points in a zone shall not exceed 32. 4 sounder outputs, 1 alarm output and 1 fault output.
Able to report short circuit and open circuit of detection zones, sounder outputs and alarm
output.
Designed with standby batteries and space provision for two sealed lead-acid batteries.
Test and disable functions.
Day/night mode settable.
Programmable on manual call point connection, sound modes, sounder delay modes and
output delay modes.
Three access levels settable via a key switch and an internal switch.
Reserved repeater panel interface for fire alarm indication of multiple zones.
Providing external ports includes RESET, SILENCE, EVAC and forced Night Mode.
1.2 Technical Specifications:
1.2.1 Operating Voltage:
Input Voltage: 220V/230VAC+10%-15%
Frequency: 50/60Hz
Input Current: 0.35 A
Fuse: 2A delayed
Recommended Wiring: 1.5mm2 or above shield cable, complying with local installation codes.
1.2.2 Batteries:
Minimum Operating Voltage: 21.5V
Maximum charging Current: 315mA
Maximum charging Voltage: 27.6V
Battery Type: Sealed lead-acid battery
Maximum Battery charging Capacity: 2 batteries, 7Ah/12V.
Recommended Battery Manufacturer and Model: Yuasa NP7-12
Maximum internal resistance of the batteries: 1Ω
Standby current of batteries when fully load: 0.1A
Maximum operating current of the batteries: 2.5A
Recommended Wiring (subject to local installation codes):
GST fire cable
Vencroft Gold and Platignum
Nexans NX 200 and 200 Plus (LPCB tested)
Prysmian FP 200 and 200 Gold
Draka Firetuf and Firetuf Plus - And all LPCB approved fire cables.
Click để xem ảnh to
GST104A: Trung tâm báo cháy 4 kênh
Model GST104A
Giá Call
2 to 16 zones can be detected, compatible with conventional detectors and manual call points. Each of the 16 detection zones can be individually configured as maximum 15 conventional detectors. The total number of detectors and manual call points in a zone shall not exceed 32. 4 sounder outputs, 1 alarm output and 1 fault output.- Able to report short circuit and open circuit of detection zones, sounder outputs and alarm
- output.
- Designed with standby batteries and space provision for two sealed lead-acid batteries.
- Test and disable functions.
- Day/night mode settable.
- Programmable on manual call point connection, sound modes, sounder delay modes and
- output delay modes.
- Three access levels settable via a key switch and an internal switch.
- Reserved repeater panel interface for fire alarm indication of multiple zones.
- Providing external ports includes RESET, SILENCE, EVAC and forced Night Mode.
- 1.2 Technical Specifications:
- 1.2.1 Operating Voltage:
Input Voltage: 220V/230VAC+10%-15%- Frequency: 50/60Hz
- Input Current: 0.35 A
- Fuse: 2A delayed
Recommended Wiring: 1.5mm2 or above shield cable, complying with local installation codes.- 1.2.2 Batteries:
- Minimum Operating Voltage: 21.5V
- Maximum charging Current: 315mA
- Maximum charging Voltage: 27.6V
- Battery Type: Sealed lead-acid battery
- Maximum Battery charging Capacity: 2 batteries, 7Ah/12V.
- Recommended Battery Manufacturer and Model: Yuasa NP7-12
- Maximum internal resistance of the batteries: 1Ω
- Standby current of batteries when fully load: 0.1A
- Maximum operating current of the batteries: 2.5A
- Recommended Wiring (subject to local installation codes):
- GST fire cable
- Vencroft Gold and Platignum
- Nexans NX 200 and 200 Plus (LPCB tested)
- Prysmian FP 200 and 200 Gold
- Draka Firetuf and Firetuf Plus
- And all LPCB approved fire cables.
Click để xem ảnh to
GST108A: Trung tâm báo cháy 8 kênh
Model GST108A
Giá Call
2 to 16 zones can be detected, compatible with conventional detectors and manual call points. Each of the 16 detection zones can be individually configured as maximum 15 conventional detectors. The total number of detectors and manual call points in a zone shall not exceed 32. 4 sounder outputs, 1 alarm output and 1 fault output.- Able to report short circuit and open circuit of detection zones, sounder outputs and alarm
- output.
- Designed with standby batteries and space provision for two sealed lead-acid batteries.
- Test and disable functions.
- Day/night mode settable.
- Programmable on manual call point connection, sound modes, sounder delay modes and
- output delay modes.
- Three access levels settable via a key switch and an internal switch.
- Reserved repeater panel interface for fire alarm indication of multiple zones.
- Providing external ports includes RESET, SILENCE, EVAC and forced Night Mode.
- 1.2 Technical Specifications:
- 1.2.1 Operating Voltage:
Input Voltage: 220V/230VAC+10%-15%- Frequency: 50/60Hz
- Input Current: 0.35 A
- Fuse: 2A delayed
Recommended Wiring: 1.5mm2 or above shield cable, complying with local installation codes.- 1.2.2 Batteries:
- Minimum Operating Voltage: 21.5V
- Maximum charging Current: 315mA
- Maximum charging Voltage: 27.6V
- Battery Type: Sealed lead-acid battery
- Maximum Battery charging Capacity: 2 batteries, 7Ah/12V.
- Recommended Battery Manufacturer and Model: Yuasa NP7-12
- Maximum internal resistance of the batteries: 1Ω
- Standby current of batteries when fully load: 0.1A
- Maximum operating current of the batteries: 2.5A
- Recommended Wiring (subject to local installation codes):
- GST fire cable
- Vencroft Gold and Platignum
- Nexans NX 200 and 200 Plus (LPCB tested)
- Prysmian FP 200 and 200 Gold
- Draka Firetuf and Firetuf Plus
- And all LPCB approved fire cables.
Click để xem ảnh to
GST116A: Tủ báo cháy 16 kênh
Model GST116A
Giá Call
2 to 16 zones can be detected, compatible with conventional detectors and manual call points. Each of the 16 detection zones can be individually configured as maximum 15 conventional detectors. The total number of detectors and manual call points in a zone shall not exceed 32. 4 sounder outputs, 1 alarm output and 1 fault output.- Able to report short circuit and open circuit of detection zones, sounder outputs and alarm
- output.
- Designed with standby batteries and space provision for two sealed lead-acid batteries.
- Test and disable functions.
- Day/night mode settable.
- Programmable on manual call point connection, sound modes, sounder delay modes and
- output delay modes.
- Three access levels settable via a key switch and an internal switch.
- Reserved repeater panel interface for fire alarm indication of multiple zones.
- Providing external ports includes RESET, SILENCE, EVAC and forced Night Mode.
- 1.2 Technical Specifications:
- 1.2.1 Operating Voltage:
Input Voltage: 220V/230VAC+10%-15%- Frequency: 50/60Hz
- Input Current: 0.35 A
- Fuse: 2A delayed
Recommended Wiring: 1.5mm2 or above shield cable, complying with local installation codes.- 1.2.2 Batteries:
- Minimum Operating Voltage: 21.5V
- Maximum charging Current: 315mA
- Maximum charging Voltage: 27.6V
- Battery Type: Sealed lead-acid battery
- Maximum Battery charging Capacity: 2 batteries, 7Ah/12V.
- Recommended Battery Manufacturer and Model: Yuasa NP7-12
- Maximum internal resistance of the batteries: 1Ω
- Standby current of batteries when fully load: 0.1A
- Maximum operating current of the batteries: 2.5A
- Recommended Wiring (subject to local installation codes):
- GST fire cable
- Vencroft Gold and Platignum
- Nexans NX 200 and 200 Plus (LPCB tested)
- Prysmian FP 200 and 200 Gold
- Draka Firetuf and Firetuf Plus
- And all LPCB approved fire cables.
Click để xem ảnh to
Đầu báo khói C-9102
Model GST C-9102
Giá Call
Thiết kế đẹp mắt, gọn nhẹ
Đèn LED đôi với góc nhìn 360°
Hốc quang có thể tháo rời giúp việc vệ sinh và bảo quản thuận tiện
Các chỉ tiêu kỹ thuật
Điện áp vận hành: 12VDC ~ 28VDC
Dòng điện vận hành:
Dòng điện khi chờ: 60μA
Dòng điện báo cháy: 10mA ~ 30mA
Môi trường vận hành:
Nhiệt độ: -10°C ~ + 50°C
Độ ẩm cho phép: 95%
Dimensions: Diameter: 100mm Height: 42mm(without base)
Click để xem ảnh to
Đầu báo khói R-6601
Model R-6601
Giá Call
Đầu báo 4 dây, điện áp làm việc 12V.
Ngõ ra NO 1A/30VDC
Điện áp làm việc: 9.6VDC-14.4VDC
Dòng diện làm việc:
Dòng tỉnh <1mA
Dòng báo động >20mA
Reset sau khi báo động: max 5s, max 2.5VDC
Power-up time < = 10s.
Click để xem ảnh to
Đầu báo nhiệt C-9103
Model C-9103
Giá Call
Đầu báo nhiệt cố định, kết hợp nhiệt gia tăng.
Có ngõ ra cho đèn chỉ thị.
Tiêu chuẩn LPCB.
Điênj áp làm việc 24VDC ( 9VDC-24VDC).
Dòng điện làm việc: tỉnh: 0,8mA, báo động: 1,4mA.
Bình luận