Mô tả sản phẩm: CTC SHDTU03 E1
The SHDSL NTU offers two different ways to connect customers to highspeed TDM services with two G.703 E1 interfaces (balance 120 Ohm RJ45 jack or unbalance 75 Ohm dual BNCs). The G.703 interface will carry data at N*64kbps rates (where n=1~32).
~~~~~mô tả~~~~~
Network Interface
• Line Rate: SHDSL per ITU G.991.2
• Coding: trellis coded pulse amplitude modulation
• Support: ANSI (Annex A) and ETSI (Annex B)
• Payload rates: 64kbps to 2.304Mbps (N x 64kbps N=1 to 36)
• Connection: RJ-45 jack (2-wire)
G.703 Interface
• Connection: RJ-45 for balanced 120 Ohm E1 cable
• Connection: BNC for unbalanced 75 Ohm E1 cable
Framing
• G.703/G.704
• CRC 4 enable/disable
• CCS/CAS
• Framed / Unframed
DSL Timing
• Network / Internal / DTE
Performance Monitoring
• ES, SES, UAS, Alarms, Errors for E1, SHDSL
Loopback Tests
• Local / Digital / Remote Loopback
Management
• Configuration with keypad and LCD display
• Console port
• Supports firmware upgrade
Physical/Electrical
• Dimensions: 19.5 x 4.8 x 16.8 cm
• Input: 90~240VAC with 50~60Hz
• Power Consumption: 10W Max
• Operation: 0 to 50°C ; Humidity: Up to 95% (non-condensing)
~~~~~tính năng~~~~~~
Features
The SHDSL NTU offers two different ways to connect customers to highspeed
TDM services with two G.703 E1 interfaces (balance 120 Ohm RJ45
jack or unbalance 75 Ohm dual BNCs). The G.703 interface will carry data
at N*64kbps rates (where n=1~32).
The SHDSL NTU can be configured and managed via EOC, or menu-driven
VT100 compatible Asynchronous Terminal Interface, either locally or
remotely.
The SHDSL NTU is equipped with an auto rate capability that identifies the
maximum line rate supported by the copper loop. This powerful automatic
configuration capability makes installation and service provisioning simple
and painless. Further flexibility is provided in the ability to manually set the
maximum NTU speed at different levels for different customer-tailored
service offerings.